{"product_id":"170aao92100-schneider-modicon-momentum-datasheet-technical-manual","title":"170AAO92100 Schneider Modicon Momentum Datasheet \u0026 Technical Manual","description":"\u003ch2\u003eSchneider 170AAO92100 Modicon Momentum Analog Output Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eSchneider 170AAO92100\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e170AAO92100\u003c\/strong\u003e Distributed analog output base module, operates as a dedicated hardware component for converting internal digital words into proportional current or voltage loops within Modicon Momentum automation system networks. This module mounts as a single-element block or integrates with an adapter to process multi-channel command outputs. It enforces real-time analog tracking for process loops without using diagnostic host resources, stabilizing field signals under varying backplane impedance constraints.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e170AAO92100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSchneider Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.215 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e141.5 mm x 47.5 mm x 125.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e150 mA typical (530 mA maximum) at 24 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Channels\u003c\/td\u003e\n\u003ctd\u003e4 analog outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Configuration\u003c\/td\u003e\n\u003ctd\u003e+\/- 10 V (load greater than or equal to 1 kOhm), 4-20 mA (load less than or equal to 0.6 kOhm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e16-bit signed data format\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpdate Time\u003c\/td\u003e\n\u003ctd\u003e2 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGalvanic Isolation\u003c\/td\u003e\n\u003ctd\u003e500 V AC between channels and ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware Protection\u003c\/td\u003e\n\u003ctd\u003eInternal 2 A slow-blow fuse, reverse polarity, output short-circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal Status Signaling\u003c\/td\u003e\n\u003ctd\u003e4 green LED indicators for channel state tracking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-40 to 85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Humidity\u003c\/td\u003e\n\u003ctd\u003e95 percent relative humidity non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Operational Altitude\u003c\/td\u003e\n\u003ctd\u003e5000 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE, UL, CSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Network Conversions and I\/O Density Scaling\u003c\/h3\u003e\n\u003cp\u003eThis analog hardware block coordinates with Modicon network adapters to sustain stable bus communication rates over EtherNet\/IP and Modbus TCP deterministic networks. The embedded circuitry balances I\/O density scaling inside dense enclosures by packing 16-bit converters within a 47.5 mm mounting depth profile. Dedicated solid-state logic nodes sequence internal conversions in a flat 2 ms cycle across all four points simultaneously. The flash component preserves local parameter mappings during runtime, enabling deterministic analog step updates without inducing latency spikes onto the primary automation bus or distorting adjacent digital transactions.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What are the specific thermal or power limitations when expanding the local I\/O density block?\u003c\/p\u003e\n\u003cp\u003eA: When maximizing density scaling inside a single termination bank, the current draw must not cross the 530 mA threshold at 24 V DC. Ambient air temperatures above 45 deg C require a 20 mm physical separation from high-heat components to maintain the nominal resolution accuracy.\u003c\/p\u003e\n\u003cp\u003eQ: How does the internal 16-bit converter structure handle data polarity transitions during voltage mode operations?\u003c\/p\u003e\n\u003cp\u003eA: The converter architecture processes a 16-bit signed data format where the most significant bit designates signal polarity. Positive and negative voltage parameters switch symmetrically inside the +\/- 10 V window without needing hardware jumper calibration.\u003c\/p\u003e\n\u003cp\u003eQ: Is hot-swapping of the analog base module permitted while the field terminal block is energized?\u003c\/p\u003e\n\u003cp\u003eA: No. Disrupting the multi-pin backplane interface while power loops remain active can introduce voltage transients into the 500 V AC galvanic isolation boundaries, causing permanent damage to the converter circuitry.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Orientation:\u003c\/strong\u003e Fix the block vertically onto a standard symmetrical 35 mm DIN rail inside an IP54 or higher protective steel housing to preserve standard airflow patterns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding Termination:\u003c\/strong\u003e Ground all analog output loop signal cables at a single point using low-impedance grounding clamps attached to the local enclosure busbar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparation of Conduits:\u003c\/strong\u003e Route all low-level 4-20 mA and +\/- 10 V output signal paths in dedicated wire trays separated from 230 V AC supply or motor control lines by at least 100 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Tightening Torque:\u003c\/strong\u003e Inspect all field wire termination screws, verifying clamping tension reaches the factory specification of 0.5 N-m to prevent contact resistance drops.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Schneider","offers":[{"title":"Default Title","offer_id":43449703858266,"sku":"170AAO92100","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/181._523c6e4e-0514-4278-85fe-a0ec3877135a.jpg?v=1780539347","url":"https:\/\/www.spareoil.com\/ar\/products\/170aao92100-schneider-modicon-momentum-datasheet-technical-manual","provider":"SpareOil Automation","version":"1.0","type":"link"}