{"product_id":"330101-00-43-15-02-05-bently-nevada-3300-xl-8-mm-proximity-probes","title":"330101-00-43-15-02-05 Bently Nevada 3300 XL 8 mm Proximity Probes","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330101-00-43-15-02-05\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330101\u003c\/strong\u003e 8 mm Proximity Probe, operates as a dedicated hardware component for non-contacting vibration and position measurement within rotor dynamics monitoring systems.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330101-00-43-15-02-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e25.2 cm x 2.4 cm x 12.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive (Powered by Proximitor Sensor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene Sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Material\u003c\/td\u003e\n\u003ctd\u003eAISI 303 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e2 mm (80 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Rotor Dynamics\u003c\/h3\u003e\n\u003cp\u003eThe 330101 series utilizes an eddy-current principle to detect the proximity of a conductive target. Proper scaling is required to maintain the standard 7.87 V\/mm (200 mV\/mil) output sensitivity provided by the matching 3300 XL Proximitor sensor. During installation, the gap voltage must be validated against a -10 VDC target at the mid-linear range to ensure linear response. Signal integrity depends on minimizing cross-talk between adjacent probes and ensuring the target material surface conforms to Bently Nevada material correction specifications to maintain accurate rotor dynamic vibration data.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the 330101 probe be utilized with older 3300 series Proximitor sensors?\u003c\/p\u003e\n\u003cp\u003eA: The 330101 8 mm probe is specifically calibrated for the 3300 XL system. Compatibility with legacy 3300 (non-XL) systems requires recalibration of the Proximitor sensor to ensure the 200 mV\/mil sensitivity is maintained.\u003c\/p\u003e\n\u003cp\u003eQ: What are the primary installation constraints for the probe tip?\u003c\/p\u003e\n\u003cp\u003eA: The probe tip must be mounted with sufficient clearance from non-target materials to prevent false readings. Ensure the probe is installed in a threaded hole with a minimum of 4 to 5 threads of engagement for structural stability in high-vibration environments.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the probe mounting bracket is rigid to minimize resonance effects at the probe location.\u003c\/li\u003e\n\u003cli\u003eVerify that the probe cable length matches the specific calibration length of the Proximitor sensor (5 m or 9 m) to avoid signal attenuation.\u003c\/li\u003e\n\u003cli\u003eUse high-quality coaxial connectors (click-loc) and ensure the connection is protected from environmental contaminants.\u003c\/li\u003e\n\u003cli\u003ePerform a bench-top gap verification using a calibrated micrometer to confirm the -10 VDC setpoint before full installation into the machinery casing.\u003c\/li\u003e\n\u003cli\u003eTighten the probe locknut securely to prevent loosening under continuous machine vibration, while ensuring the tip distance remains within the linear range of the target shaft.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43569405984858,"sku":"330101-00-43-15-02-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/330101-00-43-15-02-05.png?v=1782712943","url":"https:\/\/www.spareoil.com\/ar\/products\/330101-00-43-15-02-05-bently-nevada-3300-xl-8-mm-proximity-probes","provider":"SpareOil Automation","version":"1.0","type":"link"}