{"product_id":"330104-00-06-10-01-05-3300-xl-8-mm-proximity-probe-bently-nevada","title":"330104-00-06-10-01-05 3300 XL 8 mm Proximity Probe | Bently Nevada","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330104-00-06-10-01-05\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330104\u003c\/strong\u003e Proximity Probe, operates as a dedicated hardware component for non-contacting displacement measurement within the 3300 XL Machinery Protection System loop. The probe evaluates physical position deviations and vibration frequencies by interacting with a conductive target through an alternating radio frequency field, generating impedance modifications that are converted to analog signals by an adjacent Proximitor Sensor.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eCode\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eOption Category\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eTechnical Configuration\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e330104\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase Model\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm Proximity Probe (M10 x 1 Metric Thread)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e06\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOverall Case Length\u003c\/td\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e10\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTotal Length\u003c\/td\u003e\n\u003ctd\u003e1.0 metre (3.3 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e01\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConnector and Cable Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector with connector protector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e05\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAgency Approval\u003c\/td\u003e\n\u003ctd\u003eCSA, ATEX, IECEx Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330104-00-06-10-01-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eU.S.A.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Diameter\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Interface\u003c\/td\u003e\n\u003ctd\u003eM10 x 1 metric thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Assembly\u003c\/td\u003e\n\u003ctd\u003e75 Ohm miniature coaxial standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSourced via external Proximitor loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e60 mm case length, 1.0 metre total length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eLess than 1.0 kg nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eGap Voltage Validation (-10 VDC Targets)\u003c\/h3\u003e\n\u003cp\u003eCorrect mechanical positioning of the 3300 XL 8 mm probe tip requires a physical gap voltage validation during hot commissioning. Field engineers must adjust the probe depth within the M10 x 1 brackets until the static DC voltage measured at the Proximitor test points registers a target of -10 VDC. This -10 VDC baseline corresponds to the exact physical midpoint of the 2.0 mm (80 mils) total linear range, preventing measurement clipping caused by rotor dynamics and establishing a symmetrical window for transient peak-to-peak vibration recording.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What is the technical function of the integrated connector protector specified by option 01?\u003c\/p\u003e\n\u003cp\u003eA: The connector protector physically seals the ClickLoc coaxial mating joint from localized environment exposure, minimizing the ingress of turbine oil, moisture, and conductive particles that induce signal drift or step changes.\u003c\/p\u003e\n\u003cp\u003eQ: Is this 1.0-metre total length probe compatible with a 9.0-metre Proximitor Sensor?\u003c\/p\u003e\n\u003cp\u003eA: No. The probe must be paired with an extension cable and a Proximitor Sensor configured for the same total electrical length. A 1.0-metre probe requires an 8.0-metre extension cable to maintain the impedance matching necessary for a 9.0-metre system.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Torque Constraints:\u003c\/strong\u003e Tighten the probe casing into the mounting port using a calibrated torque wrench; do not exceed the structural limit of 33.9 N-m (300 in-lb) to prevent thread stripping or tip distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial Shield Isolation:\u003c\/strong\u003e Ensure the miniature coaxial cable outer jacket remains isolated from the machine case ground. Ground loops can degrade signal resolution and introduce high-frequency electrical noise into the TSI monitor rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Engagement Verification:\u003c\/strong\u003e Ensure proper mounting thread alignment to avoid cross-threading. The 60 mm case length must be fully locked with jam nuts once the -10 VDC gap voltage is verified.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43585390903386,"sku":"330104-00-06-10-01-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/330101-37-57-10-02-051_6b7ff457-0fb6-4878-a621-b30259b3b5a6.png?v=1783046390","url":"https:\/\/www.spareoil.com\/ar\/products\/330104-00-06-10-01-05-3300-xl-8-mm-proximity-probe-bently-nevada","provider":"SpareOil Automation","version":"1.0","type":"link"}