{"product_id":"330171-00-94-10-02-00-bently-nevada-3300-xl-proximity-probe","title":"330171-00-94-10-02-00 Bently Nevada 3300 XL Proximity Probe","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330171-00-94-10-02-00\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330171\u003c\/strong\u003e Proximity Probe, operates as a dedicated hardware component for physical displacement measurement within \u003cstrong\u003e3300 XL\u003c\/strong\u003e transducer networks.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe part number 330171-00-94-10-02-00 designates specific physical attributes and mechanical options based on the Bently Nevada ordering matrix:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330171\u003c\/strong\u003e: Base model for 3300 XL 8mm proximity probe with 3\/8-24 UNF thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00\u003c\/strong\u003e: Unthreaded length option designating 0.0 inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94\u003c\/strong\u003e: Overall case length option designating 9.4 inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10\u003c\/strong\u003e: Total length option specifying 1.0 meter (3.3 feet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e02\u003c\/strong\u003e: Connector option specifying a miniature coaxial ClickLoc connector with a connector protector, armored cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00\u003c\/strong\u003e: Agency approval option indicating no hazardous area approvals are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330171-00-94-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Diameter\u003c\/td\u003e\n\u003ctd\u003e8.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003e3\/8-24 UNF thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n\u003ctd\u003e0.0 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Case Length\u003c\/td\u003e\n\u003ctd\u003e9.4 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Probe Length\u003c\/td\u003e\n\u003ctd\u003e1.0 meter (3.3 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Construction\u003c\/td\u003e\n\u003ctd\u003eArmored coax with connector protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approval\u003c\/td\u003e\n\u003ctd\u003eNot required (Option 00)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.450 kg (approximate with armor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1.80 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive transducer sensor (0 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling \u0026amp; Rotor Dynamics Technical Characteristics\u003c\/h3\u003e\n\u003cp\u003eThis proximity probe utilizes eddy-current technology to generate a high-frequency radio frequency (RF) signal at the tip, measuring distance to a conductive target. To achieve standard eddy-current probe scaling of 7.87 V\/mm (200 mV\/mil), this 1.0-meter probe must connect to a matched 3300 XL Proximitor sensor via an 8.0-meter extension cable, establishing a 9.0-meter total system length. Precise physical installation and depth adjustments are necessary to validate the gap voltage, targeting a baseline reading of -10 VDC within the center of the linear operating region. This accurate calibration allows the system to register minute fluctuations in rotor dynamics—such as shaft vibration and axial position—while maintaining high cross-talk suppression.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How does the armored cable option (02) affect cable routing compared to standard cables?\u003c\/p\u003e\n\u003cp\u003eA: The stainless steel armor jacket provides robust mechanical protection against physical damage and abrasions. However, it requires a larger minimum bend radius and has a slightly higher overall weight, which must be factored into cable run pathways.\u003c\/p\u003e\n\u003cp\u003eQ: Can this 9.4-inch case length probe be used in high-vibration bearing housings?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The rigid 9.4-inch stainless steel sleeve allows deep penetration into the machine housing while providing stable support. To prevent probe tip vibration or deflection, the unthreaded portion is kept at 0.0 inches to maximize structural thread contact within the mounting port.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap Voltage Adjustment:\u003c\/strong\u003e Thread the probe into the mounting bracket until the Proximitor sensor output voltage measures approximately -10.0 VDC, corresponding to a nominal physical gap of 1.27 mm (50 mils) between the tip and the shaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArmor Bend Limits:\u003c\/strong\u003e Maintain a minimum bend radius of 25.4 mm (1.0 inch) for the armored section of the cable to avoid kinking or fracturing the internal coaxial core.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocknut Torquing:\u003c\/strong\u003e Once positioned, secure the probe using a standard locknut to prevent physical movement under continuous machinery vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Isolation:\u003c\/strong\u003e Ensure that the connector protector is fully installed over the coaxial junction to keep the signal isolated from machine ground and to block electromagnetic noise.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43661992722522,"sku":"330171-00-94-10-02-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/330103-00-04-10-02-00_be6be70f-57ef-4652-a746-ea6db0e81bfe.png?v=1784100365","url":"https:\/\/www.spareoil.com\/ar\/products\/330171-00-94-10-02-00-bently-nevada-3300-xl-proximity-probe","provider":"SpareOil Automation","version":"1.0","type":"link"}