{"product_id":"bently-nevada-330104-00-14-05-02-00-3300-xl-8-mm-proximity-probe","title":"Bently Nevada 330104-00-14-05-02-00 3300 XL 8 mm Proximity Probe","description":"\u003cp\u003eConfigured for non-contacting vibration and displacement measurement in machinery monitoring systems, the \u003cstrong\u003eBently Nevada 330104-00-14-05-02-00\u003c\/strong\u003e (\u003cstrong\u003e330104\u003c\/strong\u003e Proximity Probe) provides direct physical\/electrical execution. The component translates the physical gap between the probe tip and the target rotor into a proportional voltage signal when paired with a matching proximitor sensor.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330104-00-14-05-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eU.S.A.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.323 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eM10 x 1 thread, 140 mm overall case length, 0.5 m total length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive component (driven by proximitor sensor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Configuration\u003c\/td\u003e\n\u003ctd\u003eM10 x 1 thread with stainless steel armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Case Length\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Length Option\u003c\/td\u003e\n\u003ctd\u003e0.5 meter (1.6 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approval\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMachinery Monitoring and TSI Characteristics\u003c\/h3\u003e\n\u003cp\u003eThis eddy-current probe relies on definitive scaling parameters to maintain loop accuracy. During field commissioning, cross-talk suppression must be enforced by maintaining a minimum physical clearance between adjacent probe tips to prevent radio frequency interference from corrupting the dynamic signals. Field technicians must perform gap voltage validation to verify that the physical position corresponds to the linear center of the calibration curve. The probe output drives the transducer loop to target an initial bias voltage of -10 VDC, ensuring optimal linear range capture for structural tracking and rotor dynamics analysis under fluctuating thermal profiles.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How should the ClickLoc connector be handled to prevent signal loss?\u003c\/p\u003e\n\u003cp\u003eA: The ClickLoc coaxial connector requires a dry, contamination-free connection. Do not use tools to over-tighten the connection; finger-tighten past the initial click detent. The connection must be insulated from machine ground using silicone connector protectors or self-fusing tape to eliminate ground loop interference.\u003c\/p\u003e\n\u003cp\u003eQ: What are the consequences of mismatching the 0.5-meter probe with non-compliant system cabling?\u003c\/p\u003e\n\u003cp\u003eA: The Bently Nevada 3300 XL 8 mm system requires a total electrical length of either 5.0 meters or 9.0 meters between the probe tip and the proximitor sensor. Because this probe has a 0.5-meter integral cable, it must be paired with a 4.5-meter or 8.5-meter extension cable. Mismatching the total physical length alters the system inductance and capacitance, causing incorrect scale factor calibration.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Installation and Thread Engagement:\u003c\/strong\u003e Ensure the M10 x 1 threaded mounting hole is free of debris. Thread the probe body by hand to prevent cross-threading. Secure the probe using a calibrated torque wrench, ensuring the final locknut installation does not exceed the mechanical yield limits of the sensor case.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArmor and Cable Routing:\u003c\/strong\u003e Route the flexible stainless steel armor through dedicated conduits or structural channels to avoid mechanical pinching. Maintain a minimum bend radius of 25.4 mm (1.0 inch) for the armored cable to prevent internal coaxial shielding degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Grounding Integration:\u003c\/strong\u003e The probe casing must be electrically isolated from the flexible armor to prevent stray currents from entering the measurement circuit. Ensure the terminal junction box housing the extension cable connection is tied to a clean instrument ground point, while keeping the probe body isolated at the machine casing interface.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43603922845786,"sku":"330104-00-14-05-02-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/330101-37-57-10-02-051_19eb23b6-3a68-45f9-820b-c3f4fdcd4dac.png?v=1783322591","url":"https:\/\/www.spareoil.com\/ar\/products\/bently-nevada-330104-00-14-05-02-00-3300-xl-8-mm-proximity-probe","provider":"SpareOil Automation","version":"1.0","type":"link"}