{"product_id":"bently-nevada-330709-000-060-10-02-00-3300-xl-series-proximity-sensors","title":"Bently Nevada 330709-000-060-10-02-00 3300 XL Series Proximity Sensors","description":"\u003cp\u003eConfigured for physical displacement measurement in machine monitoring systems, the \u003cstrong\u003eBently Nevada 330709-000-060-10-02-00\u003c\/strong\u003e (\u003cstrong\u003e330709\u003c\/strong\u003e Proximity Probe) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe suffix structure of this 11 mm metric-threaded proximity probe model is configured as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330709\u003c\/strong\u003e: 3300 XL 11 mm Proximity Probe base model with M16 x 1.5 metric thread (without armor).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e000\u003c\/strong\u003e: Unthreaded Length Option of 0 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e060\u003c\/strong\u003e: Overall Case Length Option of 60 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10\u003c\/strong\u003e: Total Length Option of 1.0 meter (3.3 feet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e02\u003c\/strong\u003e: Connector and Cable-Type Option utilizing a miniature coaxial ClickLoc connector on standard cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00\u003c\/strong\u003e: Agency Approval Option indicating no approvals are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330709-000-060-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.15 kg (Net weight), 3.0 kg (Shipping weight)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e11.0 mm tip diameter, 60 mm case length, 1.0 m cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Profile\u003c\/td\u003e\n\u003ctd\u003eM16 x 1.5 metric thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive sensor (0 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eStandard coaxial cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling \u0026amp; Rotor Dynamics\u003c\/h3\u003e\n\u003cp\u003eThis 11 mm metric-threaded eddy-current probe generates a high-frequency electromagnetic field at its tip to monitor rotor dynamics without physical contact. To achieve standard scale factor calibration of 3.94 V\/mm (100 mV\/mil), the probe must operate with a matched 3300 XL 11 mm Proximitor sensor and corresponding extension cable. During mechanical installation, technicians must perform gap voltage validation, adjusting the physical position until the output of the system reads -10 VDC, representing the center of the linear operating range. This step minimizes calibration errors and optimizes cross-talk suppression when placing multiple sensors in close radial proximity on the shaft.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this 330709-000-060-10-02-00 probe be directly wired to an 8 mm 3300 XL Proximitor?\u003c\/p\u003e\n\u003cp\u003eA: No. The 11 mm probe coil has different inductive and physical parameters than an 8 mm probe. Connecting this probe to an 8 mm Proximitor will cause severe impedance mismatching and invalid scaling.\u003c\/p\u003e\n\u003cp\u003eQ: Is this proximity probe compatible with hot-swapping at the coaxial connector under active power?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The probe is a passive inductive device. Disconnecting or connecting the coaxial ClickLoc connector while the Proximitor sensor is powered does not cause electrical damage or system risk.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Thread Mounting:\u003c\/strong\u003e Manually thread the M16 x 1.5 body into the bracket to ensure correct alignment. Do not exceed the maximum torque limits specified for metric non-armored probe bodies to prevent structural damage to the probe coil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Gap Adjustment:\u003c\/strong\u003e Connect a voltmeter to the Proximitor sensor terminal block. Rotate the probe body into the mounting port until the output voltage matches the target value of -10.0 VDC. Lock the probe body using the provided locknuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial Connector Isolation:\u003c\/strong\u003e Always install the ClickLoc connector protector over the coaxial connection. The outer copper shield of the coaxial cable must remain electrically isolated from the machine housing to prevent industrial ground loop noise from corrupting the dynamic vibration readings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43662105313370,"sku":"330709-000-060-10-02-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/330101-00-10-10-02-cn_f40f40dd-ce8b-4284-867f-607fa787e315.png?v=1784102686","url":"https:\/\/www.spareoil.com\/ar\/products\/bently-nevada-330709-000-060-10-02-00-3300-xl-series-proximity-sensors","provider":"SpareOil Automation","version":"1.0","type":"link"}