{"product_id":"bently-nevada-330710-000-060-10-02-00-3300-xl-series-extension-cable","title":"Bently Nevada 330710-000-060-10-02-00 3300 XL Series Extension Cable","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330710-000-060-10-02-00\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330710\u003c\/strong\u003e Extension Cable, operates as a dedicated hardware component for physical signal transmission between proximity probes and Proximitor sensors within \u003cstrong\u003e3300 XL\u003c\/strong\u003e vibration monitoring platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330710-000-060-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.25 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e20.5 x 22.5 x 3.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive component (0 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eStandard coaxial cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling \u0026amp; Signal Path Integrity\u003c\/h3\u003e\n\u003cp\u003eThis 3300 XL extension cable maintains strict impedance and capacitance matching across the high-frequency analog signal path. The cable is calibrated to preserve standard eddy-current probe scaling of 3.94 V\/mm (100 mV\/mil) when paired with an 11 mm proximity probe and the corresponding Proximitor sensor. During loop commissioning, field technicians must conduct a gap voltage validation to ensure the overall electrical system length matches the Proximitor’s tuning. Proper signal pathway impedance prevents radio-frequency interference and optimizes cross-talk suppression when multiple transducer systems are installed in close proximity near machine rotor dynamics components.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this 330710 extension cable be coupled with an 8 mm proximity probe system?\u003c\/p\u003e\n\u003cp\u003eA: No. The electrical capacitance and impedance characteristics of the 330710 cable are specifically tuned for 11 mm sensor systems. Intermixing with 8 mm components disrupts the calibration curve and introduces scale factor errors.\u003c\/p\u003e\n\u003cp\u003eQ: What is the impact of altering the physical length of this extension cable in the field?\u003c\/p\u003e\n\u003cp\u003eA: Cutting, splicing, or altering the length of the coaxial cable is strictly prohibited. The total electrical length is critical to the bridge circuit calibration; any physical length deviation changes the total system impedance and invalidates the linear range calibration.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Protection:\u003c\/strong\u003e Always ensure that the ClickLoc coaxial connections are protected using connector sleeves or silicone self-fusing tape. These connections must remain dry, clean, and isolated from physical contact with machine ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding and Isolation:\u003c\/strong\u003e Prevent multiple ground pathways by isolating the coaxial cable shield from the industrial machine housing. The cable shield must only connect to ground at the Proximitor sensor terminal block.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRouting and Bend Radius Limits:\u003c\/strong\u003e Route the cable through a dedicated metal conduit to mitigate external electromagnetic interference. Maintain a minimum bend radius of 25.4 mm (1.0 inch) along the routing path to prevent permanent structural damage to the internal coaxial dielectric layers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43662126055514,"sku":"330709-000-070-10-02-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/330104-00-08-05-02-00_d696b7bb-b807-44d2-93ec-5db4865b45f1.png?v=1784103950","url":"https:\/\/www.spareoil.com\/ar\/products\/bently-nevada-330710-000-060-10-02-00-3300-xl-series-extension-cable","provider":"SpareOil Automation","version":"1.0","type":"link"}