{"product_id":"digital-output-module-24vdc-tmr-triconex-3000520-390-9562","title":"Digital Output Module 24VDC TMR Triconex 3000520-390 9562","description":"\u003ch2\u003eTriconex 9562 3000520-390 Digital Output Module\u003c\/h2\u003e\n\u003cp\u003eConfigured for fault-tolerant discrete output signal execution in safety-critical loops, the \u003cstrong\u003eTriconex 9562 3000520-390\u003c\/strong\u003e (\u003cstrong\u003e9562\u003c\/strong\u003e Digital Output Module) provides direct physical electrical execution. The hardware drivers switch 24 VDC nominal field voltage across 32 isolated channels to operate industrial actuators, terminal panels, trip relays, and inductive solenoid circuits. Operating directly within standard Tricon V9 and V10 Series Safety Instrumented System (SIS) backplanes, this module continuously processes logic outputs determined by the main processors while executing internal diagnostic verification subroutines.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e9562 (Part Number: 3000520-390)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSchneider Electric - Triconex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.0 kg (Shipping weight) \/ 1.5 kg (Net module weight)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e177.8 mm x 101.6 mm x 228.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 deg C to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e15 W typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Channels\u003c\/td\u003e\n\u003ctd\u003e32 isolated digital outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current\u003c\/td\u003e\n\u003ctd\u003eUp to 0.5 A per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArchitecture\u003c\/td\u003e\n\u003ctd\u003eTriple Modular Redundancy (TMR) 2oo3 voting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety Integrity Level\u003c\/td\u003e\n\u003ctd\u003eSIL3 capable (IEC 61508 \/ IEC 61511 compliance)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e1500 VAC galvanic isolation between backplane and field wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTermination Style\u003c\/td\u003e\n\u003ctd\u003eScrew-clamp terminals, accepts 12-22 AWG wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHigh Reliability Safety Control (SIS) Technical Attributes\u003c\/h3\u003e\n\u003cp\u003eThe module operates on a Triple Modular Redundancy (TMR) 2oo3 architecture, containing three independent execution pathways isolated physically and galvanically from each other. Each channel performs hardware-based 2-out-of-3 voting directly before signal output, mitigating single-point failures and assuring continuous operation even if an individual component pathway faults. Galvanic isolation limits are enforced at 1500 VAC between the system backplane and the field termination lines, protecting internal logic components from external electrical interference, field surges, and cross-channel faults. Fail-safe state execution routines are hardcoded into the internal circuitry; upon detection of an unrecoverable internal hardware deviation or communication failure, the affected outputs immediately drop to a de-energized, safe state. High-density scaling provides 32 independent output loops per slot, allowing full programmatic control through TriStation configurations without reducing redundant diagnostic capacity.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does the module support online hot-swap procedures, and are there specific timing constraints?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, online hot-swap is fully supported within compatible Tricon V9\/V10 backplanes. Replacement modules must be inserted into the adjacent slot within the time window allowed by the system configuration to prevent diagnostic timeouts or spurious trips during the data synchronization phase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the module handle inductive energy feedback when switching off solenoids?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The module relies on external protection elements or built-in suppression circuits. Field wiring termination boards must be checked to confirm that flyback diodes or surge suppressors are correctly matched to the inductive load, preventing high-voltage transients from degrading the galvanic isolation barriers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the exact current limits per channel under max ambient operating conditions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The module supplies up to 0.5 A per channel at 24 VDC. Aggregate module power dissipation limits must be observed, ensuring total active channels do not exceed thermal dissipation profiles when operating at the maximum temperature threshold of +60 deg C.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eField technicians must verify that all wiring complies with standard industrial instrumentation protocols. Field signals must use 12 to 22 AWG copper conductors terminated securely into the compatible screw-clamp blocks. Maintain rigid physical separation between low-voltage DC signals and high-voltage AC distribution cabling to prevent electromagnetic coupling. Internal system grounding bars must connect directly to the plant safety earth with a low-impedance path, keeping shield drain wires un-spliced and grounded at a single designated terminal point. Ensure the module chassis slides smoothly along the guide rails of the Tricon rack until the backplane connectors seat completely. Fasten all mechanical retention screws to lock the assembly against vibration. Online hot-swap replacements require the operator to confirm that no active field faults exist on the associated loop prior to removing the faulty unit.\u003c\/p\u003e","brand":"Triconex","offers":[{"title":"Default Title","offer_id":43736407048282,"sku":"9562 3000520-390","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/210._2e226579-0330-497a-a3bc-cfcf8ca157fc.jpg?v=1785122506","url":"https:\/\/www.spareoil.com\/ar\/products\/digital-output-module-24vdc-tmr-triconex-3000520-390-9562","provider":"SpareOil Automation","version":"1.0","type":"link"}