{"product_id":"ge-ic200mdl750-versamax-discrete-output-module","title":"GE IC200MDL750 VersaMax Discrete Output Module","description":"\u003cp\u003eConfigured for 12\/24 VDC discrete signal switching in VersaMax I\/O systems, the \u003cstrong\u003eGE IC200MDL750\u003c\/strong\u003e (\u003cstrong\u003eIC200MDL750\u003c\/strong\u003e Discrete Output Module) provides direct physical\/electrical execution. The module drives up to 32 positive logic (sourcing) discrete output points, split into 2 isolated groups of 16 channels each. Operable within an output voltage range of 10.2 to 30 VDC, each channel delivers 0.5 A of nominal load current with a maximum inrush current capability of 2.0 A for 100 ms. Channel response times are maintained at 0.2 ms for ON transitions and 1.0 ms for OFF transitions to execute deterministic binary control for field loads.\u003c\/p\u003e\n\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC200MDL750\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.14 kg (0.31 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e110 mm x 66.8 mm x 50 mm (Excluding carrier base)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 30 deg C (Without derating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e90 mA maximum @ 5 VDC (Backplane current draw)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule ID\u003c\/td\u003e\n\u003ctd\u003e80088008\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Channels\u003c\/td\u003e\n\u003ctd\u003e32 Discrete Outputs (2 groups of 16 channels)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Type\u003c\/td\u003e\n\u003ctd\u003eSourcing \/ Positive Logic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Output Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage Range\u003c\/td\u003e\n\u003ctd\u003e10.2 to 30 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad Current per Point\u003c\/td\u003e\n\u003ctd\u003e0.5 A per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Inrush Current\u003c\/td\u003e\n\u003ctd\u003e2.0 A for 100 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResponse Time\u003c\/td\u003e\n\u003ctd\u003eON: 0.2 ms max; OFF: 1.0 ms max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e250 VAC continuous group-to-group (1500 VAC for 1 min)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal Power Supply\u003c\/td\u003e\n\u003ctd\u003e10.2 to 30 VDC (12\/24 VDC nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Fuses\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStatus Indicators\u003c\/td\u003e\n\u003ctd\u003e32 Channel LEDs, OK LED, FLD PWR LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Network Integration \u0026amp; Backplane Integrity\u003c\/h3\u003e\n\u003cp\u003eThe IC200MDL750 communicates across the VersaMax backplane bus, drawing 90 mA from the 5 VDC logic rail to support high density discrete I\/O execution. Integrating directly into Profinet or EtherNet\/IP deterministic network drops, the hardware syncs frame updates to the physical driver stages without backplane bus latency. Scalable carrier base mounting options ensure strict firmware flash compatibility verification via native Module ID mechanisms, enabling hot-swap capabilities during active operation without disturbing power delivery to adjacent system racks.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the IC200MDL750 feature internal fuses to mitigate channel overload conditions?\u003c\/p\u003e\n\u003cp\u003eA: No. The IC200MDL750 contains no internal fuses. External current-limiting devices or external inline fuses must be installed on field output loops to protect module output transistors against direct short circuits.\u003c\/p\u003e\n\n\u003cp\u003eQ: How does ambient temperature and mounting orientation affect module output channel density?\u003c\/p\u003e\n\u003cp\u003eA: To operate all 32 output channels at maximum rated current (0.5 A per point) without thermal derating, the ambient operating temperature must be maintained between 0 and 30 deg C. Higher temperatures or vertical DIN rail mounting configurations require channel derating based on hardware manual guidelines.\u003c\/p\u003e\n\n\u003cp\u003eQ: Is an external suppression network required for driving inductive loads?\u003c\/p\u003e\n\u003cp\u003eA: Yes. Inductive field loads (such as solenoid coils or contactors) require external transient suppression circuits (such as flyback diodes or RC networks) connected directly across the load terminals to prevent inductive kickback damage to output points.\u003c\/p\u003e\n\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePower Safety Isolation\u003c\/strong\u003e: Disconnect main power to the cabinet and isolate all external 24 VDC field power supplies prior to mounting, wiring, or servicing the module.\u003c\/p\u003e\n\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCarrier Assembly\u003c\/strong\u003e: Align the module with the guide rails of the VersaMax I\/O carrier base and press firmly down until side latch mechanisms engage securely. Mount the base on a standard 35 mm DIN rail.\u003c\/p\u003e\n\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eField Wiring Connections\u003c\/strong\u003e: Wire the external 10.2 to 30 VDC power supply to the designated DC+ and DC- bus terminals on each group terminal block. Ensure all 16 output channels per group are referenced to the correct group common.\u003c\/p\u003e\n\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eInductive Suppression Setup\u003c\/strong\u003e: Place external transient suppression devices across every inductive load to prevent voltage transients from back-feeding into the channel drivers.\u003c\/p\u003e\n\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet Grounding\u003c\/strong\u003e: Ensure the DIN rail is electrically grounded to protective earth (PE) to validate the 250 VAC group-to-group isolation rating and comply with Class I Division 2 hazardous location installations.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":43791635218522,"sku":"IC200MDL750","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/IC200MDL750.png?v=1785983603","url":"https:\/\/www.spareoil.com\/ar\/products\/ge-ic200mdl750-versamax-discrete-output-module","provider":"SpareOil Automation","version":"1.0","type":"link"}