{"product_id":"p0950df-foxboro-i-a-series-datasheet-technical-manual","title":"P0950DF Foxboro I\/A Series Datasheet \u0026 Technical Manual","description":"\u003ch2\u003eFoxboro P0950DF I\/A Series Termination Assembly\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eFoxboro P0950DF\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eP0950DF\u003c\/strong\u003e Termination Assembly, operates as a dedicated hardware component for field wiring distribution and signal conditioning within I\/A Series Distributed Control System platforms. The hardware establishes direct physical connectivity between external analog sensors and primary processing units via the system baseplate interface, supporting eight independent input channels.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eP0950DF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFoxboro (Schneider Electric)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e400 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard I\/A Series termination assembly footprint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSourced via FBM module backplane connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Capacity\u003c\/td\u003e\n\u003ctd\u003e8 analog input channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Signals\u003c\/td\u003e\n\u003ctd\u003eVoltage (+\/-10 V, +\/-5 V, 0-10 V, 1-5 V), Current (0-20 mA, 4-20 mA), Thermocouple (J, K, T, E, S, R, B), RTD (Pt100, Pt1000, Cu50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTermination Type\u003c\/td\u003e\n\u003ctd\u003eScrew-clamp terminals (12-22 AWG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003eChannel-to-channel and channel-to-ground isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDIN rail or rack base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eIP20 (cabinet installation required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control \u0026amp; DCS Instrumentation Properties\u003c\/h3\u003e\n\u003cp\u003eThe component integrates high-density channel-to-channel and channel-to-ground isolation to eliminate common-mode noise and prevent ground loop interference across the eight input circuits. The hardware architecture accommodates multi-signal configurations, enabling concurrent processing of 4-20 mA HART loop protocol transmitters, voltage lines, RTD elements, and thermocouple inputs over separate channels. Automatic cold junction compensation (CJC) algorithms are sustained through localized temperature reference sensors embedded within the termination terminal array to prevent drift under variable ambient thermal loads.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How does the termination assembly handle diagnostic faults such as open-circuit conditions?\u003c\/p\u003e\n\u003cp\u003eA: The physical board infrastructure provides raw signal diagnostic routing. When paired with compatible modules such as the FBM242 or FBM247, open-circuit and short-circuit conditions are detected at the channel level and reported directly to the DCS backplane.\u003c\/p\u003e\n\u003cp\u003eQ: Is external power required to operate the P0950DF terminal array?\u003c\/p\u003e\n\u003cp\u003eA: No external power feed is required. Operational current for the internal isolation circuits and reference point sensors is supplied directly from the host Fieldbus Module via the integrated backplane connection.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Alignment:\u003c\/strong\u003e Secure the assembly onto standard DIN rails or dedicated rack bases. Verify that the structural locking tabs are completely latched to ensure physical stability against high-frequency cabinet vibrations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding Protocol:\u003c\/strong\u003e Terminate instrument cable shields directly to the master instrumentation ground bus within the cabinet enclosure. Do not ground the cable shield at both the field device and the P0950DF terminals to prevent induced ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Termination:\u003c\/strong\u003e Strip field conductors to factory-specified lengths and insert into the screw-clamp blocks (12-22 AWG). Torque all terminal screws to standard ratings to ensure continuous low-impedance electrical contact.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Foxboro","offers":[{"title":"Default Title","offer_id":43454282694746,"sku":"P0950DF","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/394._ede177da-b318-4478-8113-b270150728cc.jpg?v=1780621720","url":"https:\/\/www.spareoil.com\/ar\/products\/p0950df-foxboro-i-a-series-datasheet-technical-manual","provider":"SpareOil Automation","version":"1.0","type":"link"}