{"product_id":"yokogawa-aam50-s1-analog-output-module","title":"YOKOGAWA AAM50-S1 Analog Output Module","description":"\u003ch2\u003eYOKOGAWA AAM50-S1 Analog Output Module\u003c\/h2\u003e\n\u003cp\u003eConfigured for precision analog signal generation in CENTUM VP and CS3000 control architectures, the \u003cstrong\u003eYOKOGAWA AAM50-S1\u003c\/strong\u003e (\u003cstrong\u003eAAM50\u003c\/strong\u003e Analog Output Module) provides direct physical and electrical execution of 8-channel current control.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAAM50-S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYOKOGAWA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSingapore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e43 mm x 130 mm x 147 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePerformance\u003c\/td\u003e\n\u003ctd\u003e8-channel 4-20 mA DC, +\/- 0.1% accuracy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and DCS Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe AAM50-S1 operates as an interface between the system controller and field-mounted actuators, utilizing the 4-20 mA HART loop protocol to transmit precise control commands. The module architecture incorporates channel-to-channel isolation, which prevents ground loops and electrical interference from degrading the analog signal quality in dense I\/O configurations. Furthermore, the unit supports cold junction compensation (CJC) for integrated system applications, ensuring that output linearity is maintained across varying thermal conditions in process control and safety environments.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the AAM50-S1 support hot-swapping during active process control?\u003c\/p\u003e\n\u003cp\u003eA: The module is designed for extraction within designated maintenance windows; however, users must verify that the control loop is set to manual mode or that the redundant controller has assumed command of the field devices to prevent output signal transients during removal.\u003c\/p\u003e\n\u003cp\u003eQ: How should the load resistance be managed for the 4-20 mA outputs?\u003c\/p\u003e\n\u003cp\u003eA: Each channel supports a load resistance of up to 2 kΩ, though optimal linearity is maintained at ≤600 Ω per channel; verify that field device impedance does not exceed these thresholds to avoid signal attenuation or output saturation.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eMount the AAM50-S1 module onto a standard DIN rail or panel assembly within the control cabinet, ensuring that the backplane connector is fully engaged and the locking mechanism is secured. Terminate the output signals to the screw terminals using shielded twisted-pair cabling, with drain wires bonded to the cabinet ground bus at the entry point to mitigate electromagnetic ingress. Verify the 24 VDC power supply voltage at the terminal block before initializing the module. Following installation, use the system engineering tools to perform a loop check and confirm that output signals match the commanded digital values before enabling closed-loop control functions.\u003c\/p\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":43655251361882,"sku":"AAM50 S1","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/477._3785e706-7d68-43ba-927a-27ca9f6c7446.jpg?v=1783993543","url":"https:\/\/www.spareoil.com\/ar\/products\/yokogawa-aam50-s1-analog-output-module","provider":"SpareOil Automation","version":"1.0","type":"link"}