{"product_id":"yokogawa-asr133-s00-subsystem-communication-interface-module","title":"Yokogawa ASR133-S00 subsystem communication interface module","description":"\u003ch2\u003eYokogawa ASR133-S00 Subsystem Communication Interface Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eYokogawa ASR133-S00-S1\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eASR133-S00\u003c\/strong\u003e Subsystem Communication Interface Module, operates as a dedicated hardware component for bridging field communication between the Field Control Station (FCS) and external third-party subsystem controllers within CENTUM VP\/CS network platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eASR133-S00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e3.8 x 12.7 x 15.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-10 deg C to +55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e~300-400 mA (5 VDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Rate\u003c\/td\u003e\n\u003ctd\u003eUp to 1 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRedundancy\u003c\/td\u003e\n\u003ctd\u003eSupported (Dual module)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003eOptical\/Electrical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDCS Process Control \u0026amp; Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe ASR133-S00 facilitates data exchange via proprietary link protocols, enabling the integration of external packaged units into the primary DCS environment. The module implements optical and electrical isolation to decouple the internal system bus from external field-side subsystems, preventing electrical disturbances from impacting control processing. Support for dual-module redundancy ensures high availability, allowing for seamless switchover in the event of a primary interface fault during continuous process execution.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Does the ASR133-S00 support hot-swapping during active operation?\u003c\/p\u003e\n\u003cp\u003eA: In redundant configurations, the secondary module may be replaced without interrupting communication if the primary module maintains active status. Ensure the module is properly seated and initialized before initiating a diagnostic test or re-integrating into the redundant pair.\u003c\/p\u003e\n\u003cp\u003eQ: How is data throughput managed when interfacing with third-party controllers?\u003c\/p\u003e\n\u003cp\u003eA: The module manages data packets at speeds up to 1 Mbps. System integrators must ensure that the communication scan rates on the external subsystem do not exceed the buffer capacity of the ASR133-S00 to prevent data latency or dropped frame errors.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysical Mounting:\u003c\/strong\u003e Install the module into the designated I\/O nest slot. Ensure the locking mechanisms are engaged to maintain secure connection to the backplane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication Cabling:\u003c\/strong\u003e Utilize shielded, twisted-pair cabling for subsystem connections to reduce electromagnetic interference. Terminate shields at the cabinet ground bus, ensuring a low-impedance path to ground to prevent common-mode noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedundancy Setup:\u003c\/strong\u003e When implementing a dual-module configuration, verify that both units are firmware-synchronized via the system engineering software before activating the link to the external subsystem.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment Check:\u003c\/strong\u003e Confirm that ambient cabinet temperature remains within the specified -10 deg C to +55 deg C range. Avoid mounting the module directly above high-heat generating components to ensure stable electronic performance.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":43617010810970,"sku":"ASR133-S00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/349.1_31baf2f2-2b9c-490c-b2ff-743735e78a40.jpg?v=1783491063","url":"https:\/\/www.spareoil.com\/ar\/products\/yokogawa-asr133-s00-subsystem-communication-interface-module","provider":"SpareOil Automation","version":"1.0","type":"link"}