{"product_id":"16925-20-bently-nevada-interconnect-cable","title":"16925-20 | Bently Nevada | Interconnect Cable","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 16925-20\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e16925\u003c\/strong\u003e Interconnect Cable, operates as a dedicated hardware component for signal transmission between monitoring transducers and interface modules within machine protection networks.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e16925-20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e20 ft (6.1 m) length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +177 deg C (Standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eN\/A (Passive component)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003e3-wire Interconnect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eRotor Dynamics and Signal Integrity\u003c\/h3\u003e\n\u003cp\u003eThe 16925 cable assembly is designed to facilitate the high-frequency signal propagation required for accurate rotor dynamics observation. To ensure data integrity, the physical installation must prioritize the maintenance of the nominal -10 VDC gap voltage target for eddy-current probe interfaces. Any deviation in the impedance of the signal path, caused by damaged insulation or improper shield termination, can introduce artifacts into the vibration waveform. Cross-talk suppression is achieved through the integrated shielding layer; therefore, it is mandatory that the shield be terminated correctly at the instrumentation ground to prevent ground loops that interfere with phase measurement accuracy.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the 16925 cable assembly compatible with non-Bently Nevada transducers?\u003c\/p\u003e\n\u003cp\u003eA: The 16925 series is factory-calibrated for specific Bently Nevada transducer interfaces. Use with third-party sensors may result in impedance mismatches, impacting the frequency response and signal-to-noise ratio of the monitoring system.\u003c\/p\u003e\n\u003cp\u003eQ: What are the requirements for cable termination?\u003c\/p\u003e\n\u003cp\u003eA: The assembly must be terminated in accordance with the specific monitoring module's terminal block configuration. Ensure all connections are tight to prevent resistive heating and signal fluctuation.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRoute the cable through dedicated instrumentation pathways, maintaining a minimum 30 cm separation from high-voltage AC lines to prevent induced noise.\u003c\/li\u003e\n\u003cli\u003eEnsure the connector mating faces are clean and moisture-free before joining.\u003c\/li\u003e\n\u003cli\u003eObserve a minimum bend radius of 10 times the cable diameter during installation to prevent damage to the internal conductors and shielding.\u003c\/li\u003e\n\u003cli\u003eSecure the cable using non-conductive cable ties or clips at 1 m intervals to mitigate the effects of machine-induced vibration.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43557202427994,"sku":"16925-20","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/16710-30_128b7498-460c-46a1-8e3a-938cb8ccf3b1.png?v=1782445986","url":"https:\/\/www.spareoil.com\/es\/products\/16925-20-bently-nevada-interconnect-cable","provider":"SpareOil Automation","version":"1.0","type":"link"}