{"product_id":"21000-16-10-15-088-03-02-bently-nevada-proximity-probe-housing-assembly","title":"21000-16-10-15-088-03-02 | Bently Nevada | Proximity Probe Housing Assembly","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 21000-16-10-15-088-03-02\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e21000\u003c\/strong\u003e Proximity Probe Housing Assembly, operates as a dedicated hardware component for mechanical interface and transducer protection within machine monitoring networks.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e21000-16-10-15-088-03-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eN\/A (Passive mechanical component)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eAluminum \/ Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eRotor Dynamics and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThe 21000 housing assembly is engineered to maintain the structural alignment necessary for accurate rotor dynamics monitoring. Maintaining the proximity probe tip at the specified gap relative to the shaft surface is mandatory for linear signal acquisition. During mechanical commissioning, installers must perform gap voltage validation to ensure the transducer output targets -10 VDC at the monitoring interface. Precise gap positioning prevents the sensor from operating in non-linear regions, which would otherwise introduce amplitude distortion and frequency spectrum artifacts. Proper mounting is required to minimize housing resonance and ensure cross-talk suppression in multi-probe proximity installations.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the housing assembly compatible with different metallurgy options?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the 21000 series housing is available in both aluminum and stainless steel configurations to accommodate varying environmental requirements and corrosion resistance needs.\u003c\/p\u003e\n\u003cp\u003eQ: Does the assembly affect the eddy-current probe scaling?\u003c\/p\u003e\n\u003cp\u003eA: The housing assembly itself is passive, but proper installation ensures that the probe maintains the correct standoff distance required for standard eddy-current probe scaling protocols.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the mounting threads are cleaned and lubricated with a suitable thread compound to prevent galling and ensure a secure mechanical connection to the machine case.\u003c\/li\u003e\n\u003cli\u003eRoute the probe cabling through dedicated conduits, maintaining adequate separation from high-voltage lines to prevent electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003eVerify that the housing O-rings are seated correctly during final assembly to prevent the ingress of industrial contaminants.\u003c\/li\u003e\n\u003cli\u003ePerform a static gap check after final mechanical locking to ensure that thermal expansion of the machine case does not cause the probe tip to contact the rotor surface.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43557358501978,"sku":"21000-16-10-15-088-03-02","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/21000-16-05-00-094-03-02_a765f504-b06b-4265-aa3a-2701bc2375a4.png?v=1782453539","url":"https:\/\/www.spareoil.com\/es\/products\/21000-16-10-15-088-03-02-bently-nevada-proximity-probe-housing-assembly","provider":"SpareOil Automation","version":"1.0","type":"link"}