330104-00-05-05-11-05 Bently Nevada Proximity Probe

330104-00-05-05-11-05 | 3300 XL Proximity Probe | Bently Nevada

330104-00-05-05-11-05 | 3300 XL Proximity Probe | Bently Nevada

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330104-00-05-05-11-05, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for proximity and...

Código: 330104-00-05-05-11-05

Manufacturer: Bently Nevada
Product No.: 330104-00-05-05-11-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330104-00-05-05-11-05, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for proximity and vibration sensing within 3300 XL machinery monitoring platforms. The hardware executing the physical displacement verification translates mechanical rotor dynamics into proportional voltage deviations via high-frequency eddy-current probe scaling circuits.

Suffix Breakdown & Model Matrix

Suffix Code	Option Description	Technical Parameter
330104	Base Model	3300 XL 8 mm Reverse Mount Proximity Probe
-00	Unthreaded Length Option	0 mm
-05	Overall Case Length Option	50 mm
-05	Total Length Option	0.5 meter (1.6 feet)
-11	Connector and Cable Type Option	Miniature coaxial ClickLoc connector with connector protector, standard cable
-05	Agency Approval Option	CSA, ATEX, IECEx Approvals

Hardware Specifications

Parameter	Specification
Model	330104-00-05-05-11-05
Brand	Bently Nevada
Origin	USA
Weight	0.323 kg (Net Weight), 1.5 kg (Shipping Weight)
Dimensions	8 mm probe tip diameter, M10 x 1 thread with armor, 50 mm overall case length
Operating Temp	-51 deg C to +177 deg C nominal environmental limits
Power Consumption	Passive hardware component modulated via Proximitor Sensor loop
Connector Configuration	Miniature coaxial ClickLoc with factory integrated protector
Cable Armor	Flexible armor protection over standard cable jacket

Gap Voltage Validation and Rotor Dynamics

Physical deployment of this 8 mm reverse mount sensor requires meticulous gap voltage validation to map structural movements accurately within the linear calibration window. During static mechanical calibration, the physical gap must be adjusted until the circuit output tracks a -10 VDC target, anchoring the system at its linear midpoint. This baseline voltage optimization ensures the eddy-current probe scaling correctly interprets high-velocity rotor dynamics, avoiding signal degradation or saturation during peak operational vibration cycles.

Frequently Asked Questions

Q: What operational protection is provided by the suffix -11 option over standard connector configurations?

A: The option incorporates a specialized connector protector that mechanically shields the miniature coaxial ClickLoc junction from environmental contamination, moisture ingress, and physical strain in the terminal enclosure.

Q: Will an error in the physical unthreaded length or case length match alter the electrical calibration of the circuit?

A: No. Mechanical dimension variations modify only the physical mounting depth. The calibration depends strictly on the matched total electrical length option (0.5 meter) interacting with the corresponding Proximitor Sensor loop parameters.

Field Installation Guidelines

Mount the reverse mount threaded probe housing securely into a heavy-duty sleeve or bracket assembly to isolate the sensor from secondary structural resonance. Ensure adequate physical clearance is maintained between the 8 mm tip and surrounding conductive metals to prevent unintended peripheral eddy-current interaction. Thread the assembly into the port until the dynamic gap voltage stabilizes at precisely -10 VDC on a calibrated digital voltmeter. Secure the outer locknuts to standard engineering torque limits to eliminate drift caused by operational thermal expansion. Route the armored standard cable through dedicated flexible conduits, ensuring the minimum bend radius is maintained to protect the inner triaxial core.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.