{"product_id":"330104-00-05-50-11-00-bently-nevada-3300-xl-8-mm-proximity-probe","title":"330104-00-05-50-11-00 | Bently Nevada | 3300 XL 8 mm Proximity Probe","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330104-00-05-10-02-00\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330104\u003c\/strong\u003e Proximity Probe, operates as a dedicated hardware component for non-contacting displacement measurement within the 3300 XL 8 mm Proximity Transducer System. The component tracks dynamic shaft movement and static position parameters by monitoring eddy current variations relative to a conductive target material, transmitting high-frequency analog signals directly to a designated Proximitor Sensor.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eCode\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eOption Category\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eTechnical Configuration\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e330104\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase Model\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm Proximity Probe (M10 x 1 Metric Thread)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n\u003ctd\u003e0 mm (Fully threaded case)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e05\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOverall Case Length\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e50\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTotal Length\u003c\/td\u003e\n\u003ctd\u003e5.0 Metres (16.4 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e11\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConnector\/Cable\u003c\/td\u003e\n\u003ctd\u003eClickLoc connector with connector protector and armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAgency Approval\u003c\/td\u003e\n\u003ctd\u003eNot required \/ Standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330104-00-05-50-11-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eU.S.A.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Diameter\u003c\/td\u003e\n\u003ctd\u003e8.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e2.0 mm (80 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Scale Factor\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Impedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArmor Material\u003c\/td\u003e\n\u003ctd\u003eFlexible Stainless Steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDetermined by external Proximitor loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eM10 x 1 thread, 50 mm case length, 5.0 m total length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.0 kg (Shipping weight)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling \u0026amp; Calibration\u003c\/h3\u003e\n\u003cp\u003eThe system relies on calibrated eddy-current probe scaling to ensure linear response over the entire 2.0 mm detection range. During deployment, a critical gap voltage validation must be executed; setting the initial physical proximity to establish a -10 VDC target voltage centers the output within the linear spectrum. This precise geometric placement stabilizes the loop against rotor dynamics fluctuations and establishes the required boundary conditions for internal cross-talk suppression when adjacent probes are arrayed in close radial proximity on the same machine plane.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this 5.0-meter probe be coupled with a standard extension cable?\u003c\/p\u003e\n\u003cp\u003eA: No. This probe features a total length of 5.0 metres and must interface directly with a 5.0-meter Proximitor Sensor without intermediate extension cabling. Adding an extension cable alters the 75 Ohm loop impedance and invalidates the nominal scale factor calibration.\u003c\/p\u003e\n\u003cp\u003eQ: What specific ingress protection does the Option 11 connector protector provide?\u003c\/p\u003e\n\u003cp\u003eA: The factory-installed connector protector provides physical and chemical isolation for the gold-plated ClickLoc interface against splash oils, moisture, and particulate matter typical of bearing housings. It does not support permanent fluid submersion.\u003c\/p\u003e\n\u003cp\u003eQ: What targets are compatible with the factory-calibrated scale factor?\u003c\/p\u003e\n\u003cp\u003eA: The standard scale factor of 7.87 V\/mm assumes an AISI 4140 electric steel target. Using alternative target materials with different magnetic permeabilities or electrical conductivities requires recalibration of the receiver loop.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque Limitations:\u003c\/strong\u003e When mounting the M10 x 1 threaded housing into the machine port, do not exceed the structural limit of 33.9 N-m (300 in-lb) to prevent distortion of the probe tip or casing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArmor and Cable Routing:\u003c\/strong\u003e Maintain a minimum bend radius of 25.4 mm (1.0 inch) along the flexible stainless steel armor to avoid crimping or fracturing the internal 75 Ohm coaxial core.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation and Grounding:\u003c\/strong\u003e The coaxial outer shield must maintain insulation from the machine case ground along the entire run. Grounding must terminate strictly at the Proximitor Sensor end within the designated instrument enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43585389297754,"sku":"330104-00-05-50-11-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/330101-37-57-10-02-051_661b2a05-c028-4f8f-930a-a2b51e0001ef.png?v=1783046267","url":"https:\/\/www.spareoil.com\/es\/products\/330104-00-05-50-11-00-bently-nevada-3300-xl-8-mm-proximity-probe","provider":"SpareOil Automation","version":"1.0","type":"link"}