{"product_id":"330104-00-07-10-02-00-bently-nevada-3300-xl-8-mm-proximity-probe","title":"330104-00-07-10-02-00 | Bently Nevada | 3300 XL 8 mm Proximity Probe","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330104-00-07-10-02-00\u003c\/strong\u003e serves as the primary \u003cstrong\u003e330104\u003c\/strong\u003e Proximity Probe utilized to execute non-contacting displacement measurements across 3300 XL Machinery Protection System platforms. The probe measures static distance variations and dynamic structural oscillations by establishing a high-frequency radio frequency field against a moving conductive target, routing raw impedance modifications along its coaxial transmission line to an external matching Proximitor Sensor.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eCode\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eOption Category\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eTechnical Configuration\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e330104\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase Model\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm Proximity Probe (M10 x 1 Metric Thread)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e07\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOverall Case Length\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e10\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTotal Length\u003c\/td\u003e\n\u003ctd\u003e1.0 meter (3.3 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e02\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConnector and Cable-Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector with standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAgency Approval\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330104-00-07-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eU.S.A.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Diameter\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Selection\u003c\/td\u003e\n\u003ctd\u003eM10 x 1 metric thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Impedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive hardware component (driven by Proximitor excitation loop)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e70 mm overall case length, 1.0 meter total cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eLess than 1.0 kg nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eGap Voltage Validation (-10 VDC Targets)\u003c\/h3\u003e\n\u003cp\u003eField integration of the 330104-00-07-10-02-00 proximity probe requires strict execution of gap voltage validation to ensure accurate rotor dynamics tracking. During manual mounting within the M10 x 1 thread interfaces, field technicians must fine-tune the mechanical distance relative to the shaft target until the steady-state DC output voltage across the Proximitor Sensor test points reads exactly -10 VDC. This baseline setup aligns the sensor within the electrical midpoint of its 2.0 mm (80 mils) linear calibration span, optimizing signal accuracy and supporting successful cross-talk suppression in high-density multi-channel probe installations.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this 1.0-meter total length probe be wired directly to an instrument rack without an extension cable?\u003c\/p\u003e\n\u003cp\u003eA: No. The transducer system requires a precise total electrical length match (typically 5.0 meters or 9.0 meters) to maintain loop tuning. A 1.0-meter probe must be combined with an appropriate 4.0-meter or 8.0-meter extension cable to connect to the Proximitor Sensor.\u003c\/p\u003e\n\u003cp\u003eQ: Is this 3300 XL probe backwards compatible with older 7200 series monitoring hardware?\u003c\/p\u003e\n\u003cp\u003eA: While physical mounting dimensions may allow installation, the internal electrical properties of the 3300 XL probe are optimized to generate a 7.87 V\/mm (200 mV\/mil) scale factor when combined with a matching 3300 XL Proximitor. Mixing mismatched components will degrade linear range performance.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque Rating Interlocks:\u003c\/strong\u003e When fastening the 70 mm fully threaded metric housing into the machine port, do not exceed the structural limit of 33.9 N-m (300 in-lb) to prevent distortion of the inductive coil shell.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Handling \u0026amp; Routing Restrictions:\u003c\/strong\u003e Protect the 75 Ohm standard coaxial cable lead from sharp field edges. Maintain a minimum mechanical bend radius of 25.4 mm (1.0 inch) across the entire run to prevent conductor degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding Protocols:\u003c\/strong\u003e The outer shield of the ClickLoc miniature coaxial line must maintain complete isolation from the machine case ground. System grounding must be managed strictly at the instrument monitor enclosure terminal.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43585395064922,"sku":"330104-00-07-10-02-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/330101-00-43-15-02-05_e4f734da-1fdd-414c-bbfc-f1c1d17ffd34.png?v=1783047468","url":"https:\/\/www.spareoil.com\/es\/products\/330104-00-07-10-02-00-bently-nevada-3300-xl-8-mm-proximity-probe","provider":"SpareOil Automation","version":"1.0","type":"link"}