- +8618030270289
- Ubicación de la tienda
The Bently Nevada 330905-00-08-10-02-00, also cataloged as the 330905 Proximity Sensors, operates as a dedicated hardware component for non-contact shaft vibration and displacement measurement within 3300 NSv Machinery Monitoring System platforms. The probe assembly features an M10 x 1 metric thread profile with 0 mm unthreaded length, 80 mm overall case length, and a 1.0 m (39 in) standard coaxial cable without armor terminated by a miniature coaxial ClickLoc connector.
Suffix Breakdown & Model Matrix
| Option Code | Parameter Designation | Selected Configuration |
|---|---|---|
| 330905 | Base Model | 3300 NSv Probe, M10 x 1 thread, without armor |
| -00 | Unthreaded Length | 0 mm |
| -08 | Overall Case Length | 80 mm |
| -10 | Total Length Option | 1.0 m (39 in) |
| -02 | Connector & Cable Type | Miniature coaxial ClickLoc connector, standard cable |
| -00 | Agency Approval Option | Not required |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330905-00-08-10-02-00 |
| Brand | Bently Nevada |
| Origin | United States |
| Weight | 0.45 kg (1.0 lb) |
| Dimensions | M10 x 1 metric thread profile (80 mm overall case length) |
| Operating Temp | -51 deg C to +177 deg C (-60 deg F to +350 deg F) |
| Power Consumption | Passive transducer (Powered via Proximitor Sensor) |
| Thread Specification | M10 x 1 metric thread |
| Cable Armor | Unarmored standard coaxial cable |
| Unthreaded Length | 0 mm |
| Overall Case Length | 80 mm |
| Total Cable Length | 1.0 m (39 in) |
| Connector Type | Miniature coaxial ClickLoc connector |
| Agency Approvals | Not required (Option 00) |
Mechanical Monitoring & TSI Performance
The 330905-00-08-10-02-00 probe executes dynamic rotor dynamics analysis on narrow target surfaces and small-diameter shafts where tight side-view clearances restrict conventional transducers. Operating on high-frequency eddy-current probe scaling, the probe maintains a linear differential output proportional to target gap change when coupled with a 3300 NSv Proximitor Sensor. Aligning the physical probe body to achieve gap voltage validation targeted at -10 VDC centers the signal in its linear operating zone, securing optimum frequency response and cross-talk suppression between orthogonal X-Y channel pairs.
Frequently Asked Questions
Q: What gap voltage level validates proper mechanical positioning for the 330905 probe?
A: Adjust insertion depth until the output voltage measured at the connected 3300 NSv Proximitor Sensor equals -10 VDC, corresponding to the linear range midpoint.
Q: Can the 1.0 m probe coaxial cable connect directly to system monitoring rack channels?
A: No. The integrated 1.0 m (39 in) probe cable must connect to a matching 3300 NSv extension cable to complete the 5.0 m or 7.0 m total electrical loop length required by the Proximitor.
Q: What distinguishes the 3300 NSv probe series from standard 8 mm probes in compact housings?
A: The 3300 NSv transducer features a smaller tip diameter and reduced side-view footprint, preventing electrical side-wall clearance errors in tight bearing counterbores.
Field Installation Guidelines
- Thread the M10 x 1 probe case into the internal bearing block or mounting bracket using hand tools without exceeding rated torque limits.
- Ensure a minimum of 5 full engaged threads on the mounting port to lock the assembly securely against machine vibration.
- Route the unarmored coaxial cable along rigid support runs, maintaining smooth bend radii to prevent conductor damage or shield crimping.
- Wipe the miniature ClickLoc connector interfaces to remove grease or metallic dust prior to snapping the sleeve into its locked mechanical position.
¿Qué dicen nuestros clientes sobre nosotros?
¡Excelente soporte de emergencia!
Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.
Mark Thompson
Gerente de Mantenimiento, EE. UU.Fuente confiable de repuestos nuevos
Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.
Robert Hoffmann
Jefe de ingeniería, AlemaniaServicio y calidad de primer nivel
Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.
Lucas Müller
Director de Operaciones, AlemaniaProductos relacionados
330904-08-15-10-02-05 Bently Nevada 3300 XL Proximity Probes
$99.00
$199.00
Translation missing: es.general.search.loading