330905-00-25-05-01-CN Bently Nevada Proximity Sensors

330905-00-25-05-01-CN | Bently Nevada | 3300 NSv Proximity Probes

330905-00-25-05-01-CN | Bently Nevada | 3300 NSv Proximity Probes

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330905-00-25-05-01-CN serves as the primary 330905 Proximity Sensors utilized to execute non-contact shaft vibration and dynamic displacement...

Código: 330905-00-25-05-01-CN

Manufacturer: Bently Nevada
Product No.: 330905-00-25-05-01-CN
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 150g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330905-00-25-05-01-CN serves as the primary 330905 Proximity Sensors utilized to execute non-contact shaft vibration and dynamic displacement measurement across 3300 NSv and legacy 3300 RAM monitoring platforms. Constructed with an unarmored M10 x 1 threaded housing featuring a 0 mm unthreaded length and a 250 mm extended overall case length, the assembly interfaces via a 0.5 m protected coaxial cable terminated with a standard miniature ClickLoc probe connector and shield.

Hardware Specifications

Parameter	Specification
Model	330905-00-25-05-01-CN
Brand	Bently Nevada
Origin	United States
Weight	0.15 kg
Dimensions	M10 x 1 thread profile (250 mm overall case length)
Operating Temp	-34 deg C to +177 deg C (-30 deg F to +351 deg F)
Power Consumption	Passive transducer (Powered via Proximitor Sensor)
Probe Type	3300 NSv probe, M10 x 1 thread, without armor
Cable Length	0.5 m (20 in) protected coaxial cable
Connector Type	Standard NSv probe connector with protective shield
Design Feature	Narrow-side-view profile for constrained target areas

Mechanical Monitoring & TSI Performance

The 330905-00-25-05-01-CN probe utilizes narrow-side-view eddy-current probe scaling to monitor complex rotor dynamics in tight counterbores or small-diameter shafts where side-clearance is severely restricted. When coupled with a compatible 3300 NSv Proximitor Sensor, the coil generates a linear voltage output directly proportional to the physical gap distance. Performing gap voltage validation to achieve a target reading of -10 VDC during installation ensures the transducer operates at the center of its linear span, preventing measurement error from adjacent metallic surfaces through enhanced cross-talk suppression.

Frequently Asked Questions

Q: What gap voltage level validates proper baseline mechanical installation of the 330905 probe?

A: Adjust insertion depth until the output voltage measured from the connected 3300 NSv Proximitor Sensor reads -10 VDC, centering the probe in its linear operating zone.

Q: Can the 0.5 m probe cable connect directly to system rack terminal strips?

A: No. The integrated 0.5 m protected coaxial cable must connect to a matching 3300 NSv extension cable to complete the 5.0 m or 7.0 m tuned system loop length required by the Proximitor Sensor.

Q: What is the technical advantage of the narrow-side-view design on this probe model?

A: The narrow-side-view design restricts the emitted high-frequency magnetic field footprint, minimizing side-wall interference when mounted in narrow keyways, tight counterbores, or small machine casings.

Field Installation Guidelines

Thread the M10 x 1 casing into the mounting hole by hand to ensure correct thread engagement before applying installation torque.
Maintain at least 5 full threads of engagement to ensure rigid mounting stability against ongoing operational machine vibration.
Route the 0.5 m protected coaxial cable along rigid conduits, keeping clear of sharp internal housing corners and high-voltage AC lines.
Inspect and clean the ClickLoc miniature coaxial connector terminals before engaging and locking the protective shield assembly.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.