330910-00-18-10-02-00 Bently Nevada Proximity Probe

330910-00-18-10-02-00 3300 NSv Proximity Probe | Bently Nevada

330910-00-18-10-02-00 3300 NSv Proximity Probe | Bently Nevada

Disponibilidad: 10 Quedan en stock

Configured for high-precision displacement and vibration monitoring in compact machinery spaces, the Bently Nevada 330910-00-18-10-02-00 (3300 NSv Proximity Probe) provides...

Código: 330910-00-18-10-02-00

Manufacturer: Bently Nevada
Product No.: 330910-00-18-10-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 150g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for high-precision displacement and vibration monitoring in compact machinery spaces, the Bently Nevada 330910-00-18-10-02-00 (3300 NSv Proximity Probe) provides direct physical/electrical execution.

Suffix Breakdown & Model Matrix

The part number 330910-00-18-10-02-00 defines the specific mechanical and electrical options for the 3300 NSv probe body, cable length, termination, and certifications:

330910: Base Model for 3300 NSv Proximity Probe (M10x1 thread with armor)
00: Unthreaded Length option - 0 mm
18: Case Length option - 180 mm overall case length
10: Total Length option - 1.0 meter (39 in)
02: Connector Option - Standard cable with miniature coaxial ClickLoc connector
00: Agency Approval Option - No approvals required

Hardware Specifications

Parameter	Specification
Model	330910-00-18-10-02-00
Brand	Bently Nevada
Origin	USA
Weight	0.15 kg
Dimensions	M10x1 thread with armor, 0 mm unthreaded length, 180 mm case length
Operating Temp	-51 to 177 deg C
Power Consumption	Passive transducer element powered by connected Proximitor loop
Thread Type	M10x1 thread with protective armor
Target Calibration	Factory-calibrated to AISI 4140 steel
Total Cable Length	1.0 meter (39 in)
Connector Type	Miniature coaxial ClickLoc connector
Agency Approval	Option 00 (No approvals required)

Rotor Dynamics & Gap Voltage Validation

The 3300 NSv proximity transducer system utilizes high-frequency eddy-current probe scaling to measure target displacement without mechanical shaft contact. Engineered for tight side-clearance installations on small shafts, the narrow field probe geometry provides focused RF energy to eliminate counterbore side-view interference. During field commissioning and rotor dynamics verification, gap voltage validation requires setting the static physical clearance between the probe tip and target until a baseline target of -10 VDC is observed across the Proximitor output terminals, ensuring linear sensitivity across the dynamic displacement range.

Frequently Asked Questions

Q: What target material is pre-calibrated for the 3300 NSv proximity probe at the factory?

A: The probe system is factory-calibrated to AISI 4140 steel targets. Calibration for alternative target alloys is available upon request.

Q: Is silicone tape recommended for sealing ClickLoc connectors in turbine oil environments?

A: Silicone tape is provided as a general connector protection alternative, but it is not recommended for environments exposed to turbine oil, where dedicated connector protectors should be used instead.

Field Installation Guidelines

Mechanical Mounting: Thread the M10x1 armored probe into the mounting bracket or machine casing, taking care to avoid tip impact with the target surface.
Gap Voltage Setting: Connect a digital multimeter across the Proximitor Sensor DC terminals and adjust probe positioning until reaching the standard -10 VDC gap target.
Lock Nut Assembly: Torque the external lock nut against the mounting face to firmly secure the probe case against operational machine vibration.
Connector Mating: Fully latch the miniature coaxial ClickLoc connector to the extension cable and install protective connector sleeves to prevent fluid ingress.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.