{"product_id":"5x00419g01-emerson-ovation-series-datasheet-technical-manual","title":"5X00419G01 Emerson Ovation Series Datasheet Technical Manual","description":"\u003ch2\u003eEmerson 5X00419G01 Ovation Series\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEmerson 5X00419G01\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e5X00419G01\u003c\/strong\u003e Communication Interface Module, operates as a dedicated hardware component for data exchange management within Ovation Series platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e5X00419G01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e12 x 5 x 16 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC nominal (rack powered)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessor\u003c\/td\u003e\n\u003ctd\u003eEmbedded CPU for Ovation communication tasks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Protocols\u003c\/td\u003e\n\u003ctd\u003eOvation proprietary bus, Modbus RTU\/ASCII, Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePorts\u003c\/td\u003e\n\u003ctd\u003eRS-232, RS-422, RS-485 serial interfaces, Ethernet port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003e16 channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003eElectrical isolation between module and backplane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiagnostics\u003c\/td\u003e\n\u003ctd\u003eBuilt-in fault detection, LED indicators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity Tolerance\u003c\/td\u003e\n\u003ctd\u003e5-95% RH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL, CSA, IEC 61131-2 compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and DCS Instrumentation\u003c\/h3\u003e\n\u003cp\u003eThe module electronics employ integrated channel-to-channel isolation parameters to block transient voltages from bridging the internal processing layer. Serial and network physical layer drivers execute a 4-20 mA HART loop protocol subsystem variant to preserve communication bus transparency over extensive distance metrics. Embedded firmware routines coordinate transmission timing alongside dynamic cold junction compensation (CJC) references, stabilizing serial frame translation limits across environments subject to fluctuating temperature thresholds.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How is the physical line termination managed for the RS-485 multi-drop network interface?\u003c\/p\u003e\n\u003cp\u003eA: Line termination must be enabled using external resistance matching layouts at the terminal block assembly boundaries to suppress high-frequency signal reflections.\u003c\/p\u003e\n\u003cp\u003eQ: What is the registered backplane isolation ceiling rating for the communication channels?\u003c\/p\u003e\n\u003cp\u003eA: The physical module architecture establishes a continuous electrical isolation boundary tested to withstand up to 2500 VDC between the backplane and field network ports.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eInsert the module vertically into the allocated rack slot, applying balanced force until the multi-pin backplane connector seats completely with the receiver array. Route all serial communication and Ethernet lines within low-voltage cable paths separated from parallel high-voltage AC electrical distribution systems. Field cable shield components must terminate strictly at a single point on the dedicated plant instrumentation ground busbar to prevent ground loop inductive distortion. Maintain unimpeded vertical clearances above and below the chassis assembly to support continuous natural convection cooling.\u003c\/p\u003e","brand":"Emerson","offers":[{"title":"Default Title","offer_id":43484141748314,"sku":"5X00419G01","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/455.1_189dc8eb-678c-4c4b-b97e-832489ceb827.jpg?v=1781228370","url":"https:\/\/www.spareoil.com\/es\/products\/5x00419g01-emerson-ovation-series-datasheet-technical-manual","provider":"SpareOil Automation","version":"1.0","type":"link"}