{"product_id":"adm52-2-yokogawa-centum-vp-series-datasheet-technical-manual","title":"ADM52-2 Yokogawa CENTUM VP Series Datasheet \u0026 Technical Manual","description":"\u003ch2\u003eYokogawa ADM52-2 CENTUM VP Series Analog Input Module\u003c\/h2\u003e\n\u003cp\u003eConfigured for converting analog signals from field devices into digital data within Yokogawa CENTUM VP or ProSafe-RS control platforms, the \u003cstrong\u003eYokogawa ADM52-2\u003c\/strong\u003e (\u003cstrong\u003eADM52-2\u003c\/strong\u003e Analog Input Module) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eADM52-2 (S4 Revision)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg (0.66 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e130 mm x 30 mm x 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSourced via ESB\/ER bus node unit power rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Count\u003c\/td\u003e\n\u003ctd\u003e2 Analog Input Channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Types Supported\u003c\/td\u003e\n\u003ctd\u003e0-10 V DC Voltage, 4-20 mA DC Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e+\/-0.1% of Full Scale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e12-16 bit A\/D conversion based on parameter setup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Resistance\u003c\/td\u003e\n\u003ctd\u003eHigh impedance (Voltage) \/ 250 Ohm (Current)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Bus Interface\u003c\/td\u003e\n\u003ctd\u003eESB bus or ER bus link via node units\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-20 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhysical Mounting\u003c\/td\u003e\n\u003ctd\u003eInstalled in AMN32T or equivalent mounting nest\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control \u0026amp; DCS Instrumentation Properties\u003c\/h3\u003e\n\u003cp\u003eThe module reads continuous field device data through standard 4-20 mA HART loop protocol architectures or dedicated 0-10 V DC sensor circuits. To shield internal analog-to-digital processing blocks from high-frequency disturbances on common grounding cables, the hardware incorporates channel-to-channel isolation matrices paired with complete system bus isolation. This design maintains measurement tracking accuracy within a strict +\/-0.1% full-scale specification limit by suppressing ambient noise loops before the 12-16 bit A\/D converters finalize data registration. The resulting processed digital signals feed into the ESB or ER bus nodes using a fast scan execution cycle for real-time loop configuration.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How does the ADM52-2 respond to a broken field wire or dead loop sensor?\u003c\/p\u003e\n\u003cp\u003eA: The onboard micro-processing circuitry performs active loop validation and self-diagnostics. When input parameters fall below standard current limits (e.g., lower than 4 mA), the card logs an out-of-range flag and passes an error state notification directly to the CENTUM VP node controller.\u003c\/p\u003e\n\u003cp\u003eQ: Is this dual-channel component compatible with third-party analog inputs?\u003c\/p\u003e\n\u003cp\u003eA: The hardware interfaces with standard industrial transmitters outputting 4-20 mA current loops or 0-10 V voltage signals. Current loops utilize an integrated, precision 250 Ohm internal shunt resistor to convert loop current into measurable voltage stages.\u003c\/p\u003e\n\u003cp\u003eQ: What are the exact steps required to field-mount this module within a panel enclosure?\u003c\/p\u003e\n\u003cp\u003eA: The module installs directly into an AMN32T nesting tray or an equivalent node chassis slot. Guide the card into the structural track rails until the rear interface mating pins seat fully against the backplane connector block, and secure any provided locking tabs.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding Methods:\u003c\/strong\u003e Terminate the outer shields of all 4-20 mA input signal lines at the main marshalling cabinet ground bus bars. Do not allow field cable shields to float on both sides to prevent stray potential differences from causing inductive cross-talk on adjacent channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNesting Rail Insertion Controls:\u003c\/strong\u003e Ensure all power to the AMN32T mounting nest or node chassis is completely switched off before sliding the module into place. Proper trace alignment with the ESB\/ER backplane must be maintained during installation to prevent edge connector physical pins from experiencing pin deflection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet Ventilation Requirements:\u003c\/strong\u003e Mount the mounting nest assembly horizontally inside an environment configured to maintain clean ambient temperatures between 0 and +60 deg C. Provide unobstructed air channels below and above the enclosure slots to encourage convective cooling of internal conversion components.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":43504044114010,"sku":"ADM52-2","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/370._d6e22a5a-6190-4005-8e12-ed96aed39552.jpg?v=1781578638","url":"https:\/\/www.spareoil.com\/es\/products\/adm52-2-yokogawa-centum-vp-series-datasheet-technical-manual","provider":"SpareOil Automation","version":"1.0","type":"link"}