{"product_id":"bently-nevada-16925-17-interconnect-cable","title":"Bently Nevada 16925-17 Interconnect Cable","description":"\u003cp\u003eConfigured for signal transmission in machine protection systems, the \u003cstrong\u003eBently Nevada 16925-17\u003c\/strong\u003e (\u003cstrong\u003e16925\u003c\/strong\u003e Interconnect Cable) provides direct physical execution for transducer output coupling across monitoring platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e16925-17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.15 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e26 x 24 x 3 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eN\/A (Passive component)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eInterconnect Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eRotor Dynamics and Signal Integrity\u003c\/h3\u003e\n\u003cp\u003eThe 16925 series cable is engineered to maintain signal fidelity in environments where rotor dynamics analysis requires precise data acquisition. To ensure optimal performance of eddy-current or acceleration probes, the cable assembly is constructed to minimize impedance variations. During commissioning, it is necessary to validate the signal path integrity, specifically ensuring that the gap voltage target remains consistent with the monitor input requirements (typically -10 VDC for standard probes). Signal attenuation or excessive noise floor interference can degrade measurement accuracy; therefore, cable routing must avoid proximity to high-frequency switching lines to maintain cross-talk suppression.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this cable be used in high-temperature zones near the turbine housing?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the 16925 series is designed to withstand elevated ambient temperatures up to 177 deg C. Ensure the cable is secured and not subjected to direct mechanical contact with high-vibration surfaces that exceed its fatigue specifications.\u003c\/p\u003e\n\u003cp\u003eQ: Is the shield of the 16925-17 cable meant to be grounded at both ends?\u003c\/p\u003e\n\u003cp\u003eA: Best practice for Bently Nevada instrumentation is to ground the shield at the monitor termination point to prevent ground loops. Verify that the shield drain wire is properly secured to the designated signal ground terminal.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the connector mating surfaces are free of debris or oxidation before final engagement to maintain low contact resistance.\u003c\/li\u003e\n\u003cli\u003eMaintain a minimum bend radius of 10 times the cable diameter to prevent internal conductor deformation and degradation of shielding integrity.\u003c\/li\u003e\n\u003cli\u003eUse conduit or cable trays to isolate the signal cable from AC power lines, observing a minimum separation distance of 30 cm for EMI mitigation.\u003c\/li\u003e\n\u003cli\u003eSecure the cable with clamping mechanisms at 1 m intervals to mitigate mechanical strain during thermal cycling or machine startup\/shutdown transients.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43557191843930,"sku":"16925-17","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/16710-30_00e45ba9-aea8-4a13-9df0-34256c5cbaa3.png?v=1782445389","url":"https:\/\/www.spareoil.com\/es\/products\/bently-nevada-16925-17-interconnect-cable","provider":"SpareOil Automation","version":"1.0","type":"link"}