{"product_id":"bently-nevada-16925-25-interconnect-cable","title":"Bently Nevada 16925-25 Interconnect Cable","description":"\u003cp\u003eConfigured for signal transmission in machine protection systems, the \u003cstrong\u003eBently Nevada 16925-25\u003c\/strong\u003e (\u003cstrong\u003e16925\u003c\/strong\u003e Interconnect Cable) provides direct physical execution for transducer output coupling across monitoring platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e16925-25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e25 ft (7.6 m) length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +177 deg C (Standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eN\/A (Passive component)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor Gauge\u003c\/td\u003e\n\u003ctd\u003e22 AWG (0.5 mm2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShielding\u003c\/td\u003e\n\u003ctd\u003eEMI shielded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTermination\u003c\/td\u003e\n\u003ctd\u003e3-socket plug, terminal lugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eRotor Dynamics and Signal Integrity\u003c\/h3\u003e\n\u003cp\u003eThe 16925-25 assembly is engineered to maintain high-frequency signal fidelity required for effective rotor dynamics analysis. To ensure accurate vibration and displacement data, the installation must adhere to strict gap voltage validation protocols, typically targeting -10 VDC at the monitor input for eddy-current probe systems. The cable's shielding design is implemented for cross-talk suppression, preventing noise induction from adjacent high-power conductors. It is required that the shield is effectively grounded at the monitor termination point to prevent the formation of ground loops, which can result in erroneous phase readings or amplitude distortion in the measured vibration waveform.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the 3-socket plug be replaced if the internal pins are damaged?\u003c\/p\u003e\n\u003cp\u003eA: Field repair of the molded 3-socket plug is not recommended. Damage to the connector interface compromises the ingress protection and electrical contact integrity, necessitating replacement of the entire cable assembly to maintain system measurement accuracy.\u003c\/p\u003e\n\u003cp\u003eQ: How does cable length affect the signal response in this series?\u003c\/p\u003e\n\u003cp\u003eA: Signal attenuation increases with cable length due to parasitic capacitance. For lengths approaching the 99 ft (30 m) maximum, verify that the monitoring system's input impedance can support the resulting signal degradation without affecting frequency response limits.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRoute the cable through dedicated metallic conduit to provide additional shielding against EMI\/RFI, maintaining a minimum 30 cm separation from AC power lines.\u003c\/li\u003e\n\u003cli\u003eEnsure the 3-socket plug is fully seated into the sensor connector until the locking mechanism is engaged to guarantee low-impedance contact.\u003c\/li\u003e\n\u003cli\u003eTerminate the lug ends in a clean, vibration-isolated junction box; ensure all terminal screws are tightened to the specified torque to prevent loose connections under thermal cycling.\u003c\/li\u003e\n\u003cli\u003eSecure the cable with non-metallic clamps at intervals not exceeding 1 m to provide strain relief and minimize fatigue from machine-induced vibration.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43557205606490,"sku":"16925-25","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/16710-30_e440ea7a-cae2-4b36-b73a-f1f99ad6e7a4.png?v=1782446115","url":"https:\/\/www.spareoil.com\/es\/products\/bently-nevada-16925-25-interconnect-cable","provider":"SpareOil Automation","version":"1.0","type":"link"}