{"product_id":"bently-nevada-21000-16-10-00-144-03-02-proximity-probe-housing-assembly","title":"Bently Nevada 21000-16-10-00-144-03-02 Proximity Probe Housing Assembly","description":"\u003cp\u003eConfigured for mechanical protection and transducer support in machine monitoring systems, the \u003cstrong\u003eBently Nevada 21000-16-10-00-144-03-02\u003c\/strong\u003e (\u003cstrong\u003e21000\u003c\/strong\u003e Proximity Probe Housing Assembly) provides direct physical execution for housing 3300 XL and NSv series probes within industrial monitoring networks.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e21000-16-10-00-144-03-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e1.0 inch (25.4 mm) penetration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eN\/A (Passive mechanical component)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSleeve Material\u003c\/td\u003e\n\u003ctd\u003e304 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eRotor Dynamics and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThe 21000 housing assembly is engineered to provide the mechanical stability required for accurate rotor dynamics monitoring. Maintaining the probe at a fixed physical reference relative to the rotor surface is mandatory for capturing shaft vibration data within the linear range of the transducer. During installation, technicians must perform gap voltage validation to confirm the probe tip is set to the target -10 VDC at the monitor input. Proper mounting ensures the sensor remains within its linear eddy-current probe scaling range, preventing amplitude distortion and phase errors that arise if the probe is positioned outside specified clearances.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the aluminum and stainless steel construction require specific grounding?\u003c\/p\u003e\n\u003cp\u003eA: The housing must be installed to ensure electrical continuity with the machine case or dedicated instrument ground. Proper bonding prevents potential differences that can induce noise in the proximity probe signal path.\u003c\/p\u003e\n\u003cp\u003eQ: Can this assembly be used in hazardous environments as specified?\u003c\/p\u003e\n\u003cp\u003eA: Yes, this housing is rated for Class I, Division 1 and 2, Groups C and D applications. Ensure all conduit seals and fittings are installed according to local electrical codes for hazardous area classification.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply a compatible thread sealant to the 3\/4-14 NPT mounting threads to ensure a pressure-tight connection to the machine case.\u003c\/li\u003e\n\u003cli\u003eSecure the probe sleeve to the required 1.0 inch penetration depth, ensuring the lock nut is torqued to prevent vibration-induced movement.\u003c\/li\u003e\n\u003cli\u003eRoute the 1.0 m probe cable through appropriate conduits, ensuring a minimum separation of 30 cm from high-power AC lines to facilitate cross-talk suppression.\u003c\/li\u003e\n\u003cli\u003eVerify that the internal O-ring seals are undamaged before final assembly to maintain the integrity of the environmental protection rating.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43557354274906,"sku":"21000-16-10-00-144-03-02","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/21000-16-05-00-094-03-02_65712597-ec27-4177-be58-c4d0b23669b1.png?v=1782453374","url":"https:\/\/www.spareoil.com\/es\/products\/bently-nevada-21000-16-10-00-144-03-02-proximity-probe-housing-assembly","provider":"SpareOil Automation","version":"1.0","type":"link"}