330909-00-60-10-02-05 Bently Nevada Proximity Probe

Bently Nevada 3300 NSv Proximity Probe | 330909-00-60-10-02-05

Bently Nevada 3300 NSv Proximity Probe | 330909-00-60-10-02-05

Disponibilidad: 10 Quedan en stock

Configured for high-precision shaft displacement and vibration measurement in compact mechanical spaces, the Bently Nevada 330909-00-60-10-02-05 (3300 NSv Proximity Probe)...

Código: 330909-00-60-10-02-05

Manufacturer: Bently Nevada
Product No.: 330909-00-60-10-02-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for high-precision shaft displacement and vibration measurement in compact mechanical spaces, the Bently Nevada 330909-00-60-10-02-05 (3300 NSv Proximity Probe) provides direct physical/electrical execution.

Suffix Breakdown & Model Matrix

The part number structure defines the mechanical dimensions, total cable length, electrical termination, and regulatory approvals for this probe:

330909: Base Model for 3300 NSv Proximity Probe (3/8-24 UNF thread, armored cable)
00: Unthreaded Length option - 0.0 inches
60: Overall Case Length option - 6.0 inches
10: Total Length option - 1.0 meter (3.25 feet)
02: Connector Option - Miniature coaxial ClickLoc connector with standard cable
05: Agency Approval Option - Multiple regional hazardous area approvals

Hardware Specifications

Parameter	Specification
Model	330909-00-60-10-02-05
Brand	Bently Nevada
Origin	USA
Weight	0.82 kg (Shipping weight: 2.0 kg)
Dimensions	3/8-24 UNF thread, 6.0 in case length, 0.0 in unthreaded length
Operating Temp	-51 to 177 deg C
Power Consumption	Passive transducer element powered by connected Proximitor Sensor loop
Thread Type	3/8-24 UNF thread, with flexible armor
Total Cable Length	1.0 meter (3.25 feet)
Connector Type	Miniature coaxial ClickLoc connector
Agency Approval	Option 05 (Multiple Approvals)

Eddy-Current Probe Scaling & Gap Voltage Validation

The 3300 NSv proximity probe utilizes high-frequency eddy-current probe scaling to convert physical gap changes relative to a conductive target into precise high-frequency electrical signals. Designed specifically for tight side-clearance installations where standard 8 mm probes suffer from side-view interference, its focused coil geometry minimizes RF field dispersion. During installation and routine maintenance, gap voltage validation requires verifying a static offset target of -10 VDC across the Proximitor output terminals when the shaft is stationary, ensuring operation in the center of the calibrated linear range.

Frequently Asked Questions

Q: What is the primary mechanical benefit of the option 00 unthreaded case length?

A: An unthreaded length of 0.0 inches provides full thread engagement along the entire 6.0-inch case length, allowing maximum penetration depth adjustment inside thick mounting blocks or tapped machine casings.

Q: How is environmental protection maintained at the miniature coaxial ClickLoc connector junction?

A: The miniature coaxial ClickLoc connector features a snap-lock retaining collar. When joined to an extension cable, a connector protector sleeve must be positioned over the junction to seal against moisture and oil penetration.

Field Installation Guidelines

Mechanical Mounting: Thread the 3/8-24 UNF armored probe into the tapped port. Ensure the probe tip does not collide with the target surface during installation.
Gap Setting: Connect a digital multimeter across the Proximitor output leads and advance the probe body until reaching the standard -10 VDC gap target voltage.
Locking Assembly: Tighten the external lock nut against the mounting face to secure the probe position against operational vibration.
Cable Routing: Route the 1.0-meter armored lead through protective conduit. Maintain a minimum bend radius of 25.4 mm (1.0 inch) to prevent damage to the internal coaxial core.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.