330104-00-05-05-02-05 Bently Nevada Proximity Probe

Bently Nevada 330104-00-05-05-02-05 3300 XL Proximity Probe

Bently Nevada 330104-00-05-05-02-05 3300 XL Proximity Probe

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330104-00-05-05-02-05, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for proximity and...

Código: 330104-00-05-05-02-05

Manufacturer: Bently Nevada
Product No.: 330104-00-05-05-02-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330104-00-05-05-02-05, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for proximity and vibration sensing within 3300 XL machinery monitoring platforms. The hardware executing the physical displacement verification translates mechanical rotor dynamics into proportional voltage deviations via high-frequency eddy-current probe scaling circuits.

Suffix Breakdown & Model Matrix

Suffix Code	Option Description	Technical Parameter
330104	Base Model	3300 XL 8 mm Reverse Mount Proximity Probe
-00	Unthreaded Length Option	0.0 inches
-05	Overall Case Length Option	0.5 inches
-05	Total Length Option	0.5 meter (1.6 feet)
-02	Connector and Cable Type Option	Miniature coaxial ClickLoc connector, standard cable
-05	Agency Approval Option	Multiple global hazardous area approvals (ATEX/IECEx/CSA)

Hardware Specifications

Parameter	Specification
Model	330104-00-05-05-02-05
Brand	Bently Nevada
Origin	USA
Weight	0.12 kg nominal
Dimensions	8.0 mm probe tip diameter, 0.5 inches overall case length
Operating Temp	-51 deg C to +177 deg C nominal environmental parameters
Power Consumption	Passive hardware component modulated via Proximitor Sensor loop
Probe Tip Material	Polyphenylene sulfide (PPS)
Probe Case Material	AISI 303 or 304 stainless steel (SST)
Cable Impedance	75 Ohm nominal coaxial

Gap Voltage Validation and Cross-Talk Suppression

Physical deployment of this 8 mm reverse mount sensor requires meticulous gap voltage validation to map structural movements accurately within the linear calibration window. During static mechanical calibration, the physical gap must be adjusted until the circuit output tracks a -10 VDC target, anchoring the system at its linear midpoint. This baseline voltage optimization ensures the eddy-current probe scaling correctly interprets high-velocity rotor dynamics. Additionally, when multi-probe configurations are deployed on a single bearing housing, specific installation geometric constraints must be followed to ensure cross-talk suppression between concurrent sensor loops.

Frequently Asked Questions

Q: Does this passive proximity probe assembly support field-swapping without full loop re-calibration?

A: Yes. The 3300 XL 8 mm series probes feature matched internal electrical properties, allowing direct component interchangeability without requiring manual field calibration of the associated Proximitor.

Q: What are the continuous performance risks if the total electrical length deviates from the 0.5-meter specification?

A: Splicing or modifying the physical cable length alters total loop inductance and capacitance. This directly distorts the eddy-current tuning calibration, causing scaling errors and shifting the nominal -10 VDC baseline position.

Field Installation Guidelines

Mount the reverse mount probe housing securely into a heavy-duty sleeve or bracket assembly to isolate the sensor from secondary structural resonance. Ensure adequate physical clearance is maintained between the 8.0 mm tip and surrounding conductive metals to prevent side-viewing interference. Thread the assembly into the port until the dynamic gap voltage stabilizes at precisely -10 VDC on a calibrated digital voltmeter. Secure the outer locknuts to standard engineering torque limits to eliminate drift caused by operational thermal expansion. Keep the ClickLoc coaxial connection interface clean and dry within a sealed conduit box.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.