330104-00-06-10-02-00 Bently Nevada Proximity Probe

Bently Nevada 330104-00-06-10-02-00 3300 XL 8 mm Proximity Probe

Bently Nevada 330104-00-06-10-02-00 3300 XL 8 mm Proximity Probe

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330104-00-06-10-02-00 serves as the primary 330104 Proximity Probe utilized to execute non-contacting displacement measurements across 3300 XL...

Código: 330104-00-06-10-02-00

Manufacturer: Bently Nevada
Product No.: 330104-00-06-10-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330104-00-06-10-02-00 serves as the primary 330104 Proximity Probe utilized to execute non-contacting displacement measurements across 3300 XL Machinery Protection System platforms. The module maps static distances and structural oscillations by modulating an induced magnetic field against a moving conductive surface, sending the raw impedance variations along its integrated coaxial line to an external matching Proximitor Sensor.

Suffix Breakdown & Model Matrix

Code	Option Category	Technical Configuration
330104	Base Model	3300 XL 8 mm Proximity Probe (M10 x 1 Metric Thread)
00	Unthreaded Length	0 mm
06	Overall Case Length	60 mm
10	Total Length	1.0 metre (3.3 feet)
02	Connector and Cable Type	Miniature coaxial ClickLoc connector, standard cable
00	Agency Approval	Not required

Hardware Specifications

Parameter	Specification
Model	330104-00-06-10-02-00
Brand	Bently Nevada
Origin	U.S.A.
Probe Tip Diameter	8 mm
Thread Selection	M10 x 1 metric thread
Transmission Cable	75 Ohm coaxial standard cable
Operating Temp	-51 to +177 deg C
Power Consumption	Passive hardware component (driven by Proximitor loop)
Dimensions	60 mm total case length, 1.0 metre total cable length
Weight	Less than 1.0 kg nominal

Rotor Dynamics & Displacement Tracking

The 330104-00-06-10-02-00 operates as an inline inductive transducer optimized for analyzing real-time rotor dynamics on rotating equipment shafts. Mechanical positioning requires meticulous calibration to center the probe tip within its 2.0 mm (80 mils) linear operating window. By mapping dynamic mechanical vibrations to corresponding electrical outputs, the sensor layout yields precise displacement tracking. This design ensures structural anomalies or eccentricity variations are processed with minimal cross-talk suppression degradation when deployed alongside multi-channel radial or axial sensor arrangements.

Frequently Asked Questions

Q: Does the 1.0-metre cable configuration require an external extension cable for standard deployment?

A: Yes. The total electrical length of the transducer system must equal the calibrated length of the Proximitor Sensor (typically 5.0 metres or 9.0 metres). A 1.0-metre probe must be paired with an appropriate 4.0-metre or 8.0-metre extension cable to prevent impedance mismatches.

Q: Is this probe compatible with older 7200 series Proximitor units?

A: While the M10 x 1 physical threads may match, the 3300 XL probe is electrically optimized for the 3300 XL Proximitor series to maintain a nominal scale factor of 7.87 V/mm (200 mV/mil). Mixing mismatched series degrades scale factor linearity.

Field Installation Guidelines

Mechanical Torque Thresholds: When threading the M10 x 1 body into the machine casing, do not exceed the structural limit of 33.9 N-m (300 in-lb) to avoid damage to the casing shell or internal coils.
Coaxial Connector Joint Security: The ClickLoc miniature coaxial interface must be dry and free of lubricants before locking. Use protective boots or self-fusing insulation tape over the mated joint to shield against industrial contaminants.
Cable Bend Radius Interlocks: Maintain a minimum structural bend radius of 25.4 mm (1.0 inch) on the coaxial cable lead during routing to eliminate internal dielectric stress or conductor cracking.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.