330104-00-08-05-02-00 Bently Nevada Proximity Probe

Bently Nevada 330104-00-08-05-02-00 3300 XL 8 mm Proximity Probe

Bently Nevada 330104-00-08-05-02-00 3300 XL 8 mm Proximity Probe

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330104-00-08-05-02-00, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for mechanical displacement...

Código: 330104-00-08-05-02-00

Manufacturer: Bently Nevada
Product No.: 330104-00-08-05-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330104-00-08-05-02-00, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for mechanical displacement tracking within 3300 XL Machinery Protection System platforms. The probe measures static distance variations and dynamic oscillations by introducing a high-frequency eddy-current field against a moving conductive shaft target, routing raw impedance changes through its integral armored coaxial cable to an external Proximitor Sensor.

Suffix Breakdown & Model Matrix

Code	Option Category	Technical Configuration
330104	Base Model	3300 XL 8 mm Proximity Probe (M10 x 1 Metric Thread)
00	Unthreaded Length	0 mm
08	Overall Case Length	80 mm
05	Total Length	0.5 meters (1.6 feet)
02	Connector and Cable-Type	Miniature coaxial ClickLoc connector, standard cable with armor
00	Agency Approval	Not required

Hardware Specifications

Parameter	Specification
Model	330104-00-08-05-02-00
Brand	Bently Nevada
Origin	U.S.A.
Probe Tip Material	Polyphenylene sulfide (PPS)
Probe Case Material	AISI 303 or 304 stainless steel (SST)
Differential Pressure Seal	Viton O-ring between probe tip and case (not factory pressure tested)
Power Consumption	Passive hardware element (energized via external Proximitor loop)
Dimensions	80 mm overall case length, 0.5 meters total probe length
Weight	2 kg shipping weight

Eddy-Current Probe Scaling

The 330104-00-08-05-02-00 fulfills standard eddy-current probe scaling configurations calibrated for AISI 4140 steel targets. When energized by the matching 3300 XL Proximitor Sensor, it provides a linear scale factor output of 7.87 V/mm (200 mV/mil). Variations in the target material chemistry or surface micro-structure directly impact the magnetic permeability and electrical conductivity, altering the calibrated scaling curves. For non-4140 target applications, custom calibration curves must be managed via monitor configuration software or matching Proximitor variants to prevent inaccuracies in capturing absolute rotor dynamics.

Frequently Asked Questions

Q: Can this 0.5-meter probe be wired into a standard 9.0-meter system configuration?

A: No. Transducer components must match the precise electrical length calibrated to the Proximitor Sensor. This 0.5-meter probe is designed to achieve a 5.0-meter total loop length when combined with a specific 4.5-meter extension cable. Pair it only with a 5.0-meter Proximitor.

Q: How does the integrated armor option alter the physical handling of the coaxial cable during deployment?

A: The flexible stainless steel armor provides physical defense against cutting and crushing forces within the machine housing. However, it increases the stiffness of the outer jacket assembly and requires care to maintain minimum bend radius rules during installation.

Field Installation Guidelines

Mounting Thread Torque Limits: When fastening the 80 mm case into the metric bracket, limit mechanical torque on the M10 x 1 thread to 33.9 N-m (300 in-lb) to avoid casing fracture or deformation.
Armor Bend Radius Restrictions: Do not route the armored cable assembly through sharp right angles. Maintain a minimum physical bend radius of 25.4 mm (1.0 inch) along the execution path to protect internal conductors.
Noise and Ground Isolation: Keep the outer ClickLoc miniature coaxial connector joint insulated from any surrounding conductive structure or metal conduits. Grounding paths must be isolated from the machine case and referenced solely at the monitoring rack.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.