330104-00-08-10-02-00 Bently Nevada Proximity Probe

Bently Nevada 330104-00-08-10-02-00 3300 XL 8 mm Proximity Probe

Bently Nevada 330104-00-08-10-02-00 3300 XL 8 mm Proximity Probe

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330104-00-08-10-02-00, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for mechanical displacement...

Código: 330104-00-08-10-02-00

Manufacturer: Bently Nevada
Product No.: 330104-00-08-10-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330104-00-08-10-02-00, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for mechanical displacement tracking within 3300 XL Machinery Protection System platforms. The hardware establishes a high-frequency eddy-current field to track relative distance variances between the probe tip and a target surface, routing raw voltage deviations across an integrated coaxial link back to an external transducer module.

Suffix Breakdown & Model Matrix

Code	Option Category	Technical Configuration
330104	Base Model	3300 XL 8 mm Proximity Probe, Metric
00	Unthreaded Length	0 mm
08	Overall Case Length	80 mm
10	Total Length	1.0 meter (3.3 feet)
02	Connector and Cable-Type	Miniature coaxial ClickLoc connector, standard cable
00	Agency Approval	Not required

Hardware Specifications

Parameter	Specification
Model	330104-00-08-10-02-00
Brand	Bently Nevada
Origin	U.S.A.
Probe Tip Material	Polyphenylene sulfide (PPS)
Probe Case Material	AISI 303 or 304 stainless steel (SST)
System Total Calibration Length	1.0 meter
Operating Temp	-51 to +177 deg C
Power Consumption	Passive sensor assembly (excited by external loop power)
Dimensions	80 mm case length, 1.0 meter total cable length
Weight	0.323 kg (Net), 1.5 kg (Shipping)

Rotor Dynamics Calibration

The 330104-00-08-10-02-00 probe functions within a calibrated transducer loop to capture high-frequency oscillations associated with industrial rotor dynamics. The component maintains a native scale factor of 7.87 V/mm (200 mV/mil) when targeting standard AISI 4140 steel. Microstructural changes, shaft runout, or residual magnetism on the rotating target surface will modify the eddy-current field interaction, requiring loop tuning or compensation profiles within the monitoring rack to secure precise peak-to-peak vibration measurements.

Frequently Asked Questions

Q: Can this 1.0-meter probe loop function properly if connected directly to a 5.0-meter Proximitor Sensor?

A: No. Transducer components must match the designated system length. A 1.0-meter total length probe requires a matching 4.0-meter extension cable to interface correctly with a standard 5.0-meter Proximitor Sensor, otherwise electrical calibration will fail.

Q: Is the ClickLoc coaxial connector joint designed to withstand fluid immersion?

A: The standard ClickLoc connection is a dry joint. Without a designated connector protector or fluid-tight sealing boot, exposure to liquids, lubricants, or conductive moisture can bridge the terminal pins and disrupt the sensor bias voltage.

Field Installation Guidelines

Mechanical Torque Restrictions: When mounting the 80 mm metric case into the housing bracket, tighten the assembly to a maximum torque specification of 33.9 N-m (300 in-lb) to preserve thread structural integrity.
Coaxial Lead Routing Constraints: Avoid routing paths that force the integrated lead into sharp configurations. Maintain a minimum mechanical bend radius of 25.4 mm (1.0 inch) across the run.
Ground Loop Prevention Protocols: Ensure that the outer conductor sleeve of the terminal ClickLoc connector remains electrically isolated from the machinery casing ground. Terminate the system shield reference exclusively at the instrument rack enclosure.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.