330104-00-13-05-02-00 Bently Nevada Displacement Sensor

Bently Nevada 330104-00-13-05-02-00 3300 XL Proximity Probe

Bently Nevada 330104-00-13-05-02-00 3300 XL Proximity Probe

Disponibilidad: 10 Quedan en stock

Configured for non-contacting shaft displacement tracking in 3300 XL Machinery Protection System networks, the Bently Nevada 330104-00-13-05-02-00 (330104 Proximity Probe)...

Código: 330104-00-13-05-02-00

Manufacturer: Bently Nevada
Product No.: 330104-00-13-05-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for non-contacting shaft displacement tracking in 3300 XL Machinery Protection System networks, the Bently Nevada 330104-00-13-05-02-00 (330104 Proximity Probe) provides direct physical/electrical execution. The component establishes a localized eddy-current field against rotating or reciprocating machinery shafts, converting physical gap deviations into high-frequency impedance changes that are transmitted via a miniature coaxial cable to an external Proximitor sensor interface.

Suffix Breakdown & Model Matrix

Code	Option Category	Technical Configuration
330104	Base Model	3300 XL 8 mm Proximity Probe, Metric Thread
00	Unthreaded Length	0 mm
13	Overall Case Length	130 mm
05	Total Length	0.5 meter (1.6 feet)
02	Connector and Cable Type	Miniature coaxial ClickLoc connector, standard cable
00	Agency Approval	Not required

Hardware Specifications

Parameter	Specification
Model	330104-00-13-05-02-00
Brand	Bently Nevada
Origin	U.S.A.
Probe Tip Diameter	8 mm
Probe Tip Material	Polyphenylene sulfide (PPS)
Probe Case Material	AISI 303 or 304 stainless steel (SST)
Operating Temp	-51 to +177 deg C
Power Consumption	Passive sensor (loop-powered via external Proximitor module)
Dimensions	130 mm case length, 0.5 meter total cable length
Weight	2.0 kg shipping weight

Gap Voltage Validation (-10 VDC Targets)

Field calibration requires strict gap voltage validation to anchor the probe within its linear measuring range. During installation, the mechanical depth of the 130 mm stainless steel case must be physically adjusted within the mounting bore while reading the DC bias voltage output from the corresponding Proximitor circuit. Technicians must position the probe tip to secure a static gap voltage validation target of exactly -10 VDC, which positions the target face at the exact center of the linear calibration slope. This precise mechanical positioning ensures linear output for dynamic rotor dynamics monitoring and maximizes cross-talk suppression between close-proximity sensor pairs.

Frequently Asked Questions

Q: Can this 0.5-meter total length probe connect directly to a standard 5.0-meter Proximitor sensor?

A: No. The proximity transducer loop requires a matched total electrical length. A 0.5-meter total length probe must be paired exclusively with a 4.5-meter extension cable to satisfy the total 5.0-meter electrical system length parameter of the Proximitor.

Q: What is the mechanical function of the integrated ClickLoc coaxial connector?

A: The option 02 ClickLoc connector acts as a positive-locking coaxial interface that resists detachment from vibration. It is a dry connection and must be kept clean and free of lubricants or moisture to prevent signal degradation.

Field Installation Guidelines

Mounting Torque Restrictions: When installing the 130 mm metric threaded probe housing into the machine housing port, limit mechanical torque to a maximum of 33.9 N-m (300 in-lb) to prevent thread binding or casing structural deformation.
Coaxial Lead Bend Radius: Route the 0.5-meter standard cable assembly with a minimum bend radius of 25.4 mm (1.0 inch) to protect the internal coaxial shielding layers from mechanical fatigue.
Connector Ground Isolation: Ensure that the outer conductor shell of the ClickLoc connector joint is insulated from the machine casing. All signal shields must terminate at the common terminal ground of the monitoring enclosure to prevent ground loops.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.