330180-91-00 Bently Nevada 3300 XL Datasheet & Technical Manual

Bently Nevada 330180-91-00 3300 XL Proximitor Sensor

Bently Nevada 330180-91-00 3300 XL Proximitor Sensor

Disponibilidad: 10 Quedan en stock

Configured for high-frequency signal conditioning in vibration monitoring platforms, the Bently Nevada 330180-91-00 (330180 Proximitor Sensor) provides direct physical signal...

Código: 330180-91-00

Manufacturer: Bently Nevada
Product No.: 330180-91-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 230g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for high-frequency signal conditioning in vibration monitoring platforms, the Bently Nevada 330180-91-00 (330180 Proximitor Sensor) provides direct physical signal translation for non-contacting proximity probes.

Hardware Specifications

Parameter	Specification
Model	330180-91-00
Brand	Bently Nevada
Origin	USA
Weight	0.23 kg
Dimensions	Standard 3300 XL enclosure geometry
Operating Temp	-51 deg C to +100 deg C
Power Consumption	12 mA maximum
Housing Material	A308 aluminum

Eddy-Current Probe Scaling and Rotor Dynamics

The 330180-91-00 functions as an oscillator/demodulator, providing a linear output scaled at 7.87 mV/µm (200 mV/mil) relative to probe displacement. For precise rotor dynamics analysis, the sensor output must be verified via gap voltage validation at the terminal strip, targeting -10 VDC when the probe is positioned at the linear range midpoint. To maintain signal integrity, cross-talk suppression is achieved by observing minimum spacing requirements between adjacent probes, which prevents mutual RF interference. The integrated circuitry ensures a stable carrier signal essential for detecting sub-synchronous vibrations and shaft centerline deviations in rotating machinery.

Frequently Asked Questions

Q: Is the 330180-91-00 compatible with older 3300-series 8 mm probes?

A: Yes. The Proximitor Sensor is designed to accept 3300-series 5 mm, 3300 8 mm, and 3300 XL 8 mm proximity probes and their associated extension cables.

Q: Can this unit be mounted directly onto a DIN-rail?

A: Yes. The suffix 91 indicates a DIN mount configuration, allowing for secure attachment to standard industrial DIN-rail systems.

Field Installation Guidelines

Secure the Proximitor to the DIN-rail, ensuring the mechanical interface is rigid to prevent vibration-induced signal noise.
Connect the probe and extension cable, ensuring the coaxial connectors are hand-tightened until firm. Avoid over-tightening as this may damage the internal dielectric or connector threads.
Route signal cabling through separate conduits from AC power or motor drive cabling to maintain the integrity of the high-frequency carrier signal.
Verify the system common connection to ensure proper grounding of the signal shield.
Perform a system startup check by measuring the output voltage at the monitor terminal block to confirm it matches the predicted gap voltage of -10 VDC for the installed probe depth.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.