330500-06-00 Bently Nevada Piezo-velocity Sensor

Bently Nevada 330500-06-00 Velomitor Piezo-velocity Sensor

Bently Nevada 330500-06-00 Velomitor Piezo-velocity Sensor

Disponibilidad: 10 Quedan en stock

Configured for seismic vibration monitoring in industrial machine protection platforms, the Bently Nevada 330500-06-00 (330500-06-00 Piezo-velocity Sensor) provides direct physical...

Código: 330500-06-00

Manufacturer: Bently Nevada
Product No.: 330500-06-00
Product Type: Piezo-velocity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 3000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for seismic vibration monitoring in industrial machine protection platforms, the Bently Nevada 330500-06-00 (330500-06-00 Piezo-velocity Sensor) provides direct physical execution of acceleration-to-velocity signal conversion.

Hardware Specifications

Parameter	Specification
Model	330500-06-00
Brand	Bently Nevada
Origin	USA
Weight	3.0 kg (shipping weight)
Dimensions	Standard Velomitor housing
Operating Temp	Standard industrial range
Power Consumption	Loop-powered via monitor
Mounting Thread	5/8-18 UNF

Rotor Dynamics and Signal Integrity

The 330500-06-00 Velomitor utilizes an internal piezoelectric element integrated with signal conditioning circuitry to output a voltage signal proportional to casing vibration velocity. Unlike eddy-current probes that require -10 VDC targets for gap voltage validation, this sensor produces a continuous output based on detected mechanical velocity. To maintain signal fidelity, proper cross-talk suppression is required; interface cabling must be shielded and routed to avoid electromagnetic interference from high-power AC or variable frequency drive conductors, which can induce noise into the low-level vibration data stream.

Frequently Asked Questions

Q: Does the 5/8-18 UNF mounting stud require a specific installation procedure?

A: Yes. The mounting surface must be machined flat and perpendicular to the axis of vibration measurement. The stud should be tightened to ensure a rigid, metal-to-metal contact with the machine casing to avoid resonance errors.

Q: Is this sensor sensitive to electromagnetic noise?

A: While the internal circuitry is shielded, the output is a low-level analog signal. Ensure the cable shield is terminated correctly at the monitoring system common to prevent common-mode noise injection.

Field Installation Guidelines

Verify the mounting surface is flat, clean, and free of paint or oxidation to ensure optimal vibration transmission.
Apply a thin layer of light machine oil or silicone grease to the transducer base before mounting to maximize high-frequency coupling.
Thread the sensor into the prepared 5/8-18 UNF mounting hole and tighten until the base is fully seated.
Secure the coaxial cable at short intervals to minimize vibration-induced movement and mechanical strain on the connector.
Perform a continuity check and verify the bias voltage level at the monitor input terminals to ensure proper system initialization.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.