{"product_id":"bently-nevada-330500-06-00-velomitor-piezo-velocity-sensor","title":"Bently Nevada 330500-06-00 Velomitor Piezo-velocity Sensor","description":"\u003cp\u003eConfigured for seismic vibration monitoring in industrial machine protection platforms, the \u003cstrong\u003eBently Nevada 330500-06-00\u003c\/strong\u003e (\u003cstrong\u003e330500-06-00\u003c\/strong\u003e Piezo-velocity Sensor) provides direct physical execution of acceleration-to-velocity signal conversion.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330500-06-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.0 kg (shipping weight)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Velomitor housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard industrial range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eLoop-powered via monitor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e5\/8-18 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eRotor Dynamics and Signal Integrity\u003c\/h3\u003e\n\u003cp\u003eThe 330500-06-00 Velomitor utilizes an internal piezoelectric element integrated with signal conditioning circuitry to output a voltage signal proportional to casing vibration velocity. Unlike eddy-current probes that require -10 VDC targets for gap voltage validation, this sensor produces a continuous output based on detected mechanical velocity. To maintain signal fidelity, proper cross-talk suppression is required; interface cabling must be shielded and routed to avoid electromagnetic interference from high-power AC or variable frequency drive conductors, which can induce noise into the low-level vibration data stream.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the 5\/8-18 UNF mounting stud require a specific installation procedure?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The mounting surface must be machined flat and perpendicular to the axis of vibration measurement. The stud should be tightened to ensure a rigid, metal-to-metal contact with the machine casing to avoid resonance errors.\u003c\/p\u003e\n\u003cp\u003eQ: Is this sensor sensitive to electromagnetic noise?\u003c\/p\u003e\n\u003cp\u003eA: While the internal circuitry is shielded, the output is a low-level analog signal. Ensure the cable shield is terminated correctly at the monitoring system common to prevent common-mode noise injection.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eVerify the mounting surface is flat, clean, and free of paint or oxidation to ensure optimal vibration transmission.\u003c\/li\u003e\n\u003cli\u003eApply a thin layer of light machine oil or silicone grease to the transducer base before mounting to maximize high-frequency coupling.\u003c\/li\u003e\n\u003cli\u003eThread the sensor into the prepared 5\/8-18 UNF mounting hole and tighten until the base is fully seated.\u003c\/li\u003e\n\u003cli\u003eSecure the coaxial cable at short intervals to minimize vibration-induced movement and mechanical strain on the connector.\u003c\/li\u003e\n\u003cli\u003ePerform a continuity check and verify the bias voltage level at the monitor input terminals to ensure proper system initialization.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43551788138586,"sku":"330500-06-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/330500-04-00_1b88af9d-8dcf-435b-83d0-a01984d9c037.png?v=1782358087","url":"https:\/\/www.spareoil.com\/es\/products\/bently-nevada-330500-06-00-velomitor-piezo-velocity-sensor","provider":"SpareOil Automation","version":"1.0","type":"link"}