330850-50-00 Bently Nevada Proximity Sensor

BENTLY NEVADA 330850-50-00 3300 XL 25 mm Proximitor Sensor

BENTLY NEVADA 330850-50-00 3300 XL 25 mm Proximitor Sensor

Disponibilidad: 10 Quedan en stock

Configured for high-frequency displacement measurement in rotating machinery monitoring networks, the BENTLY NEVADA 330850-50-00 (330850 3300 XL 25 mm Proximitor...

Código: 330850-50-00

Manufacturer: Bently Nevada
Product No.: 330850-50-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 820g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for high-frequency displacement measurement in rotating machinery monitoring networks, the BENTLY NEVADA 330850-50-00 (330850 3300 XL 25 mm Proximitor Sensor) provides direct physical signal processing between the non-contacting probe and the vibration monitoring instrumentation.

Hardware Specifications

Parameter	Specification
Model	330850-50-00
Brand	Bently Nevada
Origin	USA
Weight	0.255 kg (estimated)
Dimensions	60 mm x 60 mm x 100 mm
Operating Temp	-35 deg C to +85 deg C
Power Consumption	12 mA maximum
System Length	5.0 meters

Mechanical Monitoring and TSI Characteristics

The 330850-50-00 utilizes eddy-current probe scaling to convert target distance into a proportional voltage output. System integration requires precise gap voltage validation, where the target operational setpoint is -10 VDC to ensure the linear range is centered. Monitoring performance is highly dependent on rotor dynamics; signal integrity is preserved through robust shielding. Cross-talk suppression must be implemented when installing multiple 25 mm probes in adjacent locations to prevent frequency interference within the monitoring circuit.

Frequently Asked Questions

Q: What is the primary function of the gap voltage check during installation?

A: The gap voltage check verifies that the probe is positioned at the optimal linear range of -10 VDC, ensuring that the sensor does not clip the signal at the extremes of shaft displacement.

Q: Are there specific grounding requirements for the 330850 Proximitor?

A: The Proximitor case must be grounded to the monitor chassis to ensure RFI/EMI immunity. Avoid creating ground loops by ensuring the probe tip is electrically isolated from the machine housing if required by the installation geometry.

Field Installation Guidelines

Mount the Proximitor unit in a protected cabinet environment, utilizing the panel mount holes for mechanical stability.
Ensure coaxial cable routing avoids high-voltage power lines to mitigate electromagnetic noise induction into the signal path.
Tighten all BNC-style coaxial connectors until finger-tight; excessive force or the use of tools can damage the connector dielectric and degrade signal performance.
Verify system continuity and insulation resistance of the extension cable prior to final connection to the Proximitor.
Confirm the final gap voltage reading with a high-impedance multimeter after the machine has reached thermal equilibrium.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.