{"product_id":"general-electric-ic200mdl730-versamax-discrete-output-module","title":"General Electric IC200MDL730 VersaMax Discrete Output Module","description":"\u003cp\u003eConfigured for 24 VDC discrete signal switching in VersaMax I\/O systems, the \u003cstrong\u003eGeneral Electric IC200MDL730\u003c\/strong\u003e (\u003cstrong\u003eIC200MDL730\u003c\/strong\u003e Discrete Output Module) provides direct physical\/electrical execution. The module drives up to 8 positive logic (sourcing) output channels, routing current from an external 18 to 30 VDC power supply to external loads at up to 2.0 A per point. Designed with integrated overcurrent and short-circuit protection circuits, the hardware continuously monitors field loops and signals point faults back to the controller while visually indicating fault states via individual channel amber LEDs.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC200MDL730\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.17 kg (0.38 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard VersaMax Carrier Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e50 mA @ 5 VDC (Backplane draw)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule ID\u003c\/td\u003e\n\u003ctd\u003eFFFF8140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Points\u003c\/td\u003e\n\u003ctd\u003e8 Discrete Outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Type\u003c\/td\u003e\n\u003ctd\u003eSourcing \/ Positive Logic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage Range\u003c\/td\u003e\n\u003ctd\u003e17.5 to 30 VDC (24 VDC nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Load Current\u003c\/td\u003e\n\u003ctd\u003e2.0 A per point @ 30 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal Power Supply\u003c\/td\u003e\n\u003ctd\u003e18 to 30 VDC (24 VDC nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003eNone (group-to-group or point-to-point)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCircuit Protection\u003c\/td\u003e\n\u003ctd\u003eOvercurrent and short-circuit protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStatus Indicators\u003c\/td\u003e\n\u003ctd\u003e8 Output Point LEDs, OK LED, FLD PWR LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Network Attributes \u0026amp; Backplane Integration\u003c\/h3\u003e\n\u003cp\u003eThe IC200MDL730 maintains high backplane bus communication velocity across VersaMax I\/O stations, drawing 50 mA from the 5 VDC backplane supply to power internal logic. It interfaces directly with CPU network interface units across Profinet or EtherNet\/IP deterministic networks to execute real-time discrete switching operations. Native firmware flash compatibility guarantees continuous diagnostic reporting—including point-level overload detection—while maintaining deterministic loop refresh speeds across scalable I\/O carrier topologies.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What power sequencing procedure is required when applying field power to the module?\u003c\/p\u003e\n\u003cp\u003eA: Backplane power must be established for at least 1 second before applying external field power (18 to 30 VDC) to ensure internal control logic initializes prior to energizing output circuits.\u003c\/p\u003e\n\u003cp\u003eQ: How does the IC200MDL730 indicate short-circuit or overload conditions on field outputs?\u003c\/p\u003e\n\u003cp\u003eA: The module illuminates an amber LED corresponding to the faulted channel point and reports a point-fault signal to the VersaMax CPU for system-level alarm logging.\u003c\/p\u003e\n\u003cp\u003eQ: Is hot-swapping supported for the IC200MDL730?\u003c\/p\u003e\n\u003cp\u003eA: Hot insertion is supported on VersaMax carrier bases; however, accurate physical alignment during insertion is required to avoid pin bending or backplane bus communication disruption.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePower Isolation\u003c\/strong\u003e: Disconnect main power to the cabinet and field loops prior to mounting or removing the carrier module.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBackplane Power Initialization\u003c\/strong\u003e: Ensure the CPU or expansion receiver energizes the 5 VDC backplane bus for 1 second before switching on the external 18 to 30 VDC field power supply.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eField Device Wiring\u003c\/strong\u003e: Wire positive logic loads to the channel output terminals on the carrier base. Connect the common side of the load to the negative rail of the external 24 VDC supply.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePower Supply Capacity\u003c\/strong\u003e: Verify that the external DC field power supply provides sufficient transient current capacity during short-circuit events to prevent voltage dips on adjacent field loops.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGrounding \u0026amp; Shielding\u003c\/strong\u003e: Ensure the mounting DIN rail is properly bonded to protective earth (PE) to mitigate electromagnetic interference in high-current switching installations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":43791488811098,"sku":"IC200MDL730","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/IC200MDL730.png?v=1785983076","url":"https:\/\/www.spareoil.com\/es\/products\/general-electric-ic200mdl730-versamax-discrete-output-module","provider":"SpareOil Automation","version":"1.0","type":"link"}