Honeywell RM7865C1007 Burner Control Relay Module

Disponibilidad: 4 Quedan en stock

DescriptionThe Honeywell RM7865C1007 is a 7800 Series relay-based combustion safety controller designed for industrial boiler and burner management applications. It...

Código: RM7865C1007

Manufacturer: Honeywell
Product No.: RM7865C1007
Product Type: Burner Control Module
Product Origin: USA
Payment:T/T, Western Union
Weight: 710g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Description

The Honeywell RM7865C1007 is a 7800 Series relay-based combustion safety controller designed for industrial boiler and burner management applications. It is engineered for use in utility boilers, packaged heating systems, and industrial process furnaces where precise control of purge, ignition sequencing, and flame supervision is required. The module manages pre-purge, post-purge, pilot ignition, and main flame validation logic to ensure stable and safe combustion startup cycles.

This controller is designed to reduce operational downtime by enforcing deterministic burner sequencing and fault lockout behavior. It integrates diagnostic feedback, interlock monitoring, and flame signal processing through the 7800 Series architecture, providing high-reliability ignition control under continuous industrial duty conditions.

Features

Microprocessor-based sequence control for reliable burner ignition.
35 s configurable pre-purge and post-purge cycle control.
2 s pilot flame establishing period.
4 s main flame establishing period.
Lockout interlock supervision with automatic fault shutdown.
Purge fan switch verification function.
Nonvolatile memory for fault history and sequence retention.
First-out fault indication via external display module support.
Supports interchangeable flame amplifier modules.

Applications

The RM7865C1007 is typically deployed in:

Industrial process furnaces.
Utility and commercial boiler management systems.
Packaged heating systems requiring automated combustion safety.
Burner management systems (BMS) requiring sequence-based ignition control.

Technical Specifications

Model	RM7865C1007
Series	7800 Series
Supply Voltage	120 VAC
Frequency	50/60 Hz
Power Consumption	Approx 6 W
Pre/Post Purge Time	35 s
Pilot Flame Establishing Time	2 s
Main Flame Establishing Time	4 s
Operating Temperature	0 to 60 deg C
Weight	1.57 lbs

Installation Guidelines

Ensure the system power is disconnected before installing or removing the module from the subbase.
The module must be installed on a compatible Honeywell 7800 Series subbase.
Ensure proper grounding of the subbase to the chassis to prevent EMI interference.
Verify that the flame amplifier module is correctly seated and compatible with the burner flame sensor type.
Route high-voltage ignition cables away from low-voltage sensor and communication wiring to prevent signal interference.
Ensure adequate ventilation around the control cabinet to maintain operating temperatures within the 0 to 60 deg C range.

FAQ

Is the RM7865C1007 field-programmable?

No, this module operates on fixed safety logic with microprocessor-based sequence control and does not require field-level programming.

What is required for flame signal processing?

The module requires an interchangeable flame amplifier module (sold separately) to process signals from the flame sensor, depending on your specific burner configuration.

How does the unit handle faults?

The unit features lockout interlock supervision with automatic fault shutdown and supports first-out fault indication when connected to an external display module.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.