{"product_id":"nftp5s-00-yokogawa-centum-vp-fio-series-datasheet-technical-manual","title":"NFTP5S-00 Yokogawa CENTUM VP FIO Series Datasheet \u0026 Technical Manual","description":"\u003ch2\u003eYokogawa NFTP5S-00 CENTUM VP Series Field I\/O Terminal Block\u003c\/h2\u003e\n\u003cp\u003eConfigured for executing physical signal routing between field instruments and digital I\/O processing cards within CENTUM VP and ProSafe-RS control nodes, the \u003cstrong\u003eYokogawa NFTP5S-00\u003c\/strong\u003e (\u003cstrong\u003eNFTP5S-00\u003c\/strong\u003e Field I\/O Terminal Block) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNFTP5S-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.25 kg (0.55 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e114 mm x 32.6 mm x 60.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +70 deg C (Extended operational window)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive physical connection bus (Zero internal active power draw)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Points\u003c\/td\u003e\n\u003ctd\u003e32 Channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal Type\u003c\/td\u003e\n\u003ctd\u003eHeavy-duty screw or clamp interface terminal arrays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Voltage\u003c\/td\u003e\n\u003ctd\u003e250 V AC\/DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Current\u003c\/td\u003e\n\u003ctd\u003e10 A continuous boundary limit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation Resistance\u003c\/td\u003e\n\u003ctd\u003e100 M Ohm minimum verified at 500 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric Strength\u003c\/td\u003e\n\u003ctd\u003e2000 V AC sustained for 1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-20 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eFlame-retardant industrial-grade thermoplastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity Boundaries\u003c\/td\u003e\n\u003ctd\u003e5 to 90% RH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control \u0026amp; DCS Instrumentation Properties\u003c\/h3\u003e\n\u003cp\u003eThe terminal hardware manages multi-channel field wire concentration loops by providing 32 discrete connection channels linked directly to central ESB\/ER bus node components. To maintain linear signal integrity across standard 4-20 mA HART loop protocol lines, the mechanical design integrates advanced physical isolation layers across the terminal blocks. Built-in terminal separations resist up to 2000 V AC of dielectric stress for 1 minute, effectively shielding local logic boards from unexpected field-side voltage transients and stopping ground loop fluctuations from causing data degradation inside the DCS cabinet.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What are the consequences of deploying this terminal block configuration inside an active safety instrumented system (SIS)?\u003c\/p\u003e\n\u003cp\u003eA: The passive architecture maintains direct circuit paths with no internal software processing delays. This makes it fully transparent to the ProSafe-RS control logic, allowing it to support fail-safe signal distribution while matching the strict timing parameters of the safety system.\u003c\/p\u003e\n\u003cp\u003eQ: How do the mechanical screw terminals prevent loose connection faults caused by ambient plant vibrations?\u003c\/p\u003e\n\u003cp\u003eA: The terminals use compression plates made of tempered alloys that exert a continuous clamping force on the wire. This mechanical clamping prevents the wires from backing out or loosening during long-term exposure to standard industrial vibration frequencies.\u003c\/p\u003e\n\u003cp\u003eQ: Does this block contain active temperature tracking components or integrated reference junctions?\u003c\/p\u003e\n\u003cp\u003eA: No. The NFTP5S-00 is a passive termination interface block intended for standard digital and analog routing. It contains no active microprocessors, internal reference junctions, or built-in A\/D conversion components.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Tightening and Wire Strip Adjustments:\u003c\/strong\u003e Strip the outer conductor shielding back to match the slot opening profile of the screw terminal clamp. Insert the wire completely into the pressure saddle and torque the screw terminal firmly to establish an optimal, low-resistance connection path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Ground Routing Restraints:\u003c\/strong\u003e Guide all field sensor and loop drain shields to a centralized, single-point master grounding plate inside the marshalling cabinet. Do not ground the shields at the field instrument side to prevent stray currents from creating ground loops across the 32 channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN Rail Retention and Lock Placement:\u003c\/strong\u003e Snug the flame-retardant thermoplastic housing onto a standard 35 mm symmetric DIN rail track. Lock mechanical end stops tightly against both sides of the module cluster to prevent side-to-side drift when the panel assembly is exposed to vibration.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":43504404103258,"sku":"NFTP5S-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/128_7b660407-6f8f-468f-8b47-3ce75664ed03.jpg?v=1781589593","url":"https:\/\/www.spareoil.com\/es\/products\/nftp5s-00-yokogawa-centum-vp-fio-series-datasheet-technical-manual","provider":"SpareOil Automation","version":"1.0","type":"link"}