{"product_id":"p0961bc-foxboro-control-processor-module-cp40b-new-original-stock","title":"P0961BC Foxboro Control Processor Module CP40B | New \u0026 Original Stock","description":"\u003ch2\u003eFoxboro P0961BC I\/A Series Control Processor Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eFoxboro P0961BC\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eP0961BC\u003c\/strong\u003e Control Processor Module (CP40B), serves as the primary \u003cstrong\u003eP0961BC\u003c\/strong\u003e Control Processor utilized to execute regulatory, logic, and timing control functions across I\/A Series DCS platforms. The hardware coordinates real-time data exchange with associated Field Bus Modules (FBMs) via redundant high-speed backplane communication buses, executing deterministic control loops without internal transport jitter. This specific unit features hardwired system connections to interface directly with low-level signal distribution sub-assemblies.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eP0961BC (CP40B)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFoxboro (Schneider Electric)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.2 kg (2.55 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e3.5 cm x 45 cm x 23 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePowered via FBM backplane bus architecture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Capacity\u003c\/td\u003e\n\u003ctd\u003eMulti-channel scaling dependent on paired FBM profiles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Types\u003c\/td\u003e\n\u003ctd\u003e4-20 mA current loops, voltage signals, thermocouples, RTDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTermination Type\u003c\/td\u003e\n\u003ctd\u003eScrew-clamp terminals (12-22 AWG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003eChannel-to-channel and channel-to-ground isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDIN rail or rack base mounting matrix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-40 to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eIP20 (Requires dedicated cabinet enclosure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiagnostics\u003c\/td\u003e\n\u003ctd\u003eOpen-circuit and short-circuit fault identification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE, UL, cUL, ATEX compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control \u0026amp; DCS Instrument Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe P0961BC CP40B architectural layout contains dedicated physical bus logic designed to maintain continuous 4-20 mA HART loop protocol pass-through without data collision. Real-time control execution tasks communicate through the backplane bus while preserving complete channel-to-channel isolation parameters to prevent electrical interference from corrupting critical control logic. For thermal monitoring nodes, the module supports stabilized low-voltage referencing to protect the systemic cold junction compensation (CJC) equations calculated inside the processor loop against local thermal drift.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the P0961BC control processor support online hardware hot-swap capabilities?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The CP40B hardware interface permits live replacement on the backplane baseboard. However, redundant configuration parameters must be fully synced prior to removal to ensure flawless master-to-slave switching execution.\u003c\/p\u003e\n\u003cp\u003eQ: What type of internal diagnostics are continuously run by this processor module?\u003c\/p\u003e\n\u003cp\u003eA: The onboard hardware runs comprehensive power-on self-tests (POST) and continuous runtime cyclic redundancy checks (CRC) on bus communications, alongside direct open-circuit and short-circuit point diagnostic monitoring across its paired termination paths.\u003c\/p\u003e\n\u003cp\u003eQ: Can this module directly process field sensor signals without an intermediate FBM?\u003c\/p\u003e\n\u003cp\u003eA: No. The P0961BC operates as the active processing engine (CP40B) that interfaces through specified termination assemblies and FBM hardware. It requires an FBM subsystem layer to convert physical analog field signals into digital data frames.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet Environmental Layout\u003c\/strong\u003e: Mount the module horizontally or vertically on the factory-specified base rack or 35 mm DIN rail. Ensure it resides in an IP20 minimum cabinet with uninterrupted cooling clearances of at least 50 mm above and below the module faceplate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding Control\u003c\/strong\u003e: Connect all instrumentation shield drains to a single independent master instrument ground bar within the control enclosure. Do not route shield paths through multiple chassis ground points to avoid parasitic ground loop noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Cable Infrastructure\u003c\/strong\u003e: Route low-voltage instrumentation lines (4-20 mA loops, RTD elements, and thermocouple wires) inside distinct wire ways separated by a minimum of 300 mm from high-voltage AC electrical distribution lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Block Torque Constraints\u003c\/strong\u003e: When utilizing the integrated screw-clamp blocks, terminate conductors ranging from 12 to 22 AWG. Ensure all terminal screws are torqued down to standard industrial parameters to verify continuous electrical contact.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Foxboro","offers":[{"title":"Default Title","offer_id":43454348787802,"sku":"P0961BC","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/404_922ab019-3af7-4031-9e2d-fa61524eb2ee.jpg?v=1780627915","url":"https:\/\/www.spareoil.com\/es\/products\/p0961bc-foxboro-control-processor-module-cp40b-new-original-stock","provider":"SpareOil Automation","version":"1.0","type":"link"}