- +8618030270289
- Ubicación de la tienda
Correo electrónico: spareoil.com@industriaxplc.com
Description
The Schneider Electric AS-BDAP-208 is a specialized relay output module designed for integration within the Modicon 800 Series I/O architecture. This unit provides 8 independent electromechanical relay channels, facilitating the interface between low-voltage control logic and higher-voltage field load circuits. Engineered for robust performance in demanding industrial environments—including petrochemical processing, thermal power generation, and heavy manufacturing—this module ensures reliable discrete signal switching while maintaining critical galvanic isolation between field devices and the controller backplane.
Features
- 8-Channel Relay Output: Features eight independent, normally open (NO) mechanical relay contacts for versatile load control.
- Galvanic Isolation: Provides high-capacity dielectric separation between the field wiring and the internal backplane bus, protecting the processor from inductive surges and potential short-circuits.
- Integrated Protection: Each channel incorporates localized snubber networks to mitigate contact degradation caused by inductive counter-electromotive force during switching.
- Diagnostic Feedback: Front-panel LED indicators provide real-time status monitoring for each individual output channel, allowing for rapid field diagnostics.
- Flexible Compatibility: Supports a wide operating voltage range, accommodating both AC and DC load requirements.
Technical Specifications
| Model | AS-BDAP-208 |
| Manufacturer | Schneider Electric |
| Channel Count | 8 (Normally Open) |
| Voltage Range | 24 to 240 VAC / 24 to 30 VDC |
| Current Rating (Per Point) | 2.0 A (Max) |
| Current Rating (Total) | 12.0 A (Cumulative Max) |
| Isolation Voltage | 1500 VAC (Contact to Backplane) |
| Backplane Power Draw | 320 mA at 5 VDC |
| Operating Temperature | 0 to 60 deg C |
| Storage Temperature | -40 to 85 deg C |
| Humidity | 5 to 95% (non-condensing) |
Installation Guidelines
- Handling: This module contains sensitive electronic components. Always use proper ESD (electrostatic discharge) grounding procedures during installation or maintenance.
- Power Safety: Ensure all power to the I/O rack and field load circuits is disconnected before inserting or removing the module to prevent electrical arcing or damage.
- Mounting: Ensure the module is fully seated in the designated backplane slot and that the front retaining screws are tightened to provide a secure ground connection to the chassis.
- Wiring: Use the provided removable screw terminal block for field connections. Ensure wires are properly stripped and secured to prevent intermittent contact or short circuits.
- Environment: Install in a clean, dry location within the specified temperature range. Ensure adequate ventilation around the I/O rack to prevent heat accumulation.
FAQ
What is the primary function of the AS-BDAP-208 module?
The AS-BDAP-208 acts as a relay interface, allowing a Modicon 800 Series controller to safely switch external AC or DC loads by providing galvanic isolation between the control logic and the field devices.
Can this module handle inductive loads?
Yes, the module is equipped with internal snubber networks designed to suppress inductive spikes generated during the switching of coils or other inductive loads.
¿Qué dicen nuestros clientes sobre nosotros?
¡Excelente soporte de emergencia!
Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.
Mark Thompson
Gerente de Mantenimiento, EE. UU.Fuente confiable de repuestos nuevos
Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.
Robert Hoffmann
Jefe de ingeniería, AlemaniaServicio y calidad de primer nivel
Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.
Lucas Müller
Director de Operaciones, AlemaniaProductos relacionados
