{"product_id":"yokogawa-aip571-s2-fieldbus-interface-module","title":"Yokogawa AIP571 S2 Fieldbus Interface Module","description":"\u003ch2\u003eYokogawa AIP571 S2 Remote I\/O Interface Module\u003c\/h2\u003e\n\u003cp\u003eConfigured for high-speed fieldbus integration in CENTUM VP platforms, the \u003cstrong\u003eYokogawa AIP571 S2\u003c\/strong\u003e (\u003cstrong\u003eAIP571 S2\u003c\/strong\u003e Interface Module) provides direct electrical execution of process communication between field instrumentation and DCS controllers.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAIP571 S2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnknown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3 - 0.41 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e100 x 260 x 45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e15 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eCENTUM VP \/ CS DCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd\u003eFOUNDATION Fieldbus H1, RS-485\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and FOUNDATION Fieldbus Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eAIP571 S2\u003c\/strong\u003e module operates as a gateway between the fieldbus segments and the DCS backplane. The module architecture incorporates comprehensive channel-to-channel isolation to prevent ground potential shifts from affecting bus data integrity. Furthermore, it manages FOUNDATION Fieldbus H1 segment power and communication traffic. Because the module supports intrinsic safety (Ex ia IIC T6), engineers utilize this device to connect field devices located in hazardous environments directly to the control network.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the module support hot-swapping during active system operation?\u003c\/p\u003e\n\u003cp\u003eA: You may replace the module without de-energizing the entire backplane. However, you must verify that the DCS control software has marked the segment as \"maintenance mode\" to prevent loss of signal logs during the extraction process.\u003c\/p\u003e\n\u003cp\u003eQ: How does the module handle communication redundancy?\u003c\/p\u003e\n\u003cp\u003eA: The AIP571 S2 interfaces with the dual-redundant ESB bus. This architecture ensures that the system maintains communication even if one bus path experiences an electrical fault or physical disconnection.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Secure the module into the designated slot on the remote I\/O rack. Tighten the retaining screws to ensure proper grounding and electrical contact with the backplane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Connect the fieldbus segments to the terminal blocks using shielded twisted-pair cables. Maintain proper polarity on the H1 segment to prevent bus communication errors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Terminate cable shields at the designated grounding bar in the cabinet. This practice provides a low-impedance path for noise and surge protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValidation:\u003c\/strong\u003e Use a fieldbus diagnostic tool to confirm signal levels on the H1 segments before powering the DCS loops. Ensure the segment voltage sits within the 12-32 VDC range to maintain device loop integrity.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":43627508432986,"sku":"AIP571\/S2","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/387_20dd66ab-a23d-4372-b62d-1d7ad5d8d203.jpg?v=1783663547","url":"https:\/\/www.spareoil.com\/es\/products\/yokogawa-aip571-s2-fieldbus-interface-module","provider":"SpareOil Automation","version":"1.0","type":"link"}