{"product_id":"yokogawa-ynt512d-p11-kt-fa-m3-dcs-ethernet-repeater-module","title":"Yokogawa YNT512D-P11\/KT FA-M3 DCS Ethernet Repeater Module","description":"\u003ch2\u003eYokogawa YNT512D-P11\/KT FA-M3\/DCS Module\u003c\/h2\u003e\n\u003cp\u003eConfigured for high-speed network communication and dual-redundant signal amplification in distributed control systems, the \u003cstrong\u003eYokogawa YNT512D-P11\/KT\u003c\/strong\u003e (\u003cstrong\u003eYNT512D\u003c\/strong\u003e Ethernet Interface \u0026amp; V Net Bus Repeater) provides direct physical\/electrical execution. The module handles simultaneous bridging between standard industrial networks and proprietary control backplanes, ensuring deterministic data integrity without data packet dropping.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Model (YNT512D):\u003c\/strong\u003e Specifies the core dual-function hardware platform serving as both an Ethernet interface and a V Net bus repeater for dual-redundant bus topologies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP11 Extension:\u003c\/strong\u003e Designates the specific hardware revision, internal firmware baseline, and physical port orientation for rack and DIN-rail alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKT Suffix:\u003c\/strong\u003e Identifies the factory integration kit configuration, which includes the designated structural cable tray assembly while omitting standalone power supply units and external I\/O cards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eYNT512D-P11\/KT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa Electric Corporation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e7.40 lbs (3.4 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e144 x 144 x 72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to +50 deg C (extended margin up to +55 deg C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003e100-240 VAC (50\/60 Hz) or 24 VDC +\/-5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible System\u003c\/td\u003e\n\u003ctd\u003eFA-M3 range-free controller \/ Distributed Control Systems (DCS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Standards\u003c\/td\u003e\n\u003ctd\u003eIEEE 802.3 compliant - 10BASE-T, 100BASE-TX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Protocols\u003c\/td\u003e\n\u003ctd\u003eTCP\/IP, UDP\/IP (Ethernet), V Net (Proprietary)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBus Architecture\u003c\/td\u003e\n\u003ctd\u003eDual-redundant V Net bus configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Formats\u003c\/td\u003e\n\u003ctd\u003eASCII and Binary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEvent Transmission\u003c\/td\u003e\n\u003ctd\u003eUp to 128 bytes per single transmission\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Style\u003c\/td\u003e\n\u003ctd\u003eRack-mounted or standard DIN rail mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIngress Protection\u003c\/td\u003e\n\u003ctd\u003eIP65 rated enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control \u0026amp; DCS Instrumentation\u003c\/h3\u003e\n\u003cp\u003eThe Yokogawa YNT512D-P11\/KT incorporates channel-to-channel isolation across its communication interfaces to block transient voltage spikes from damaging the internal processor logic. When operating on the V Net layer, the hardware implements real-time signal regeneration and continuous physical layer diagnostic monitoring to maintain balance across the dual-redundant bus paths. The network transceiver circuit executes hardware-driven collision detection and signal amplification, allowing the transmission loop to extend up to 500 m per segment without inducing attenuation or packet loss.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does this module require an independent external power supply to execute V Net repeat functions?\u003c\/p\u003e\n\u003cp\u003eA: No. The internal logic derives its operational power directly from the main rack backplane connection or the dedicated 100-240 VAC \/ 24 VDC terminal inputs depending on the chassis configuration, removing the need for auxiliary power modules.\u003c\/p\u003e\n\u003cp\u003eQ: Can the YNT512D-P11\/KT be hot-swapped during active DCS operations?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The YNT512D family architecture permits online maintenance and component replacement without dropping power to the active rack, provided the redundant V Net partner module is online and sustaining network traffic.\u003c\/p\u003e\n\u003cp\u003eQ: How does the unit process simultaneous TCP\/IP and UDP\/IP packet routing?\u003c\/p\u003e\n\u003cp\u003eA: The onboard protocol processor handles data packet segmentation natively at the hardware level, separating deterministic control commands from non-time-critical asynchronous ASCII\/Binary transmissions.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis Grounding:\u003c\/strong\u003e Secure the hardware framework directly to the DIN rail or system rack using standard industrial grounding straps. The ground impedance between the module chassis and the master station earth bar must remain below 1 Ohm to ensure effective noise immunity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing and Shielding:\u003c\/strong\u003e Route all 10BASE-T\/100BASE-TX Ethernet lines and V Net cables through the supplied factory cable tray. Maintain a minimum separation distance of 200 mm from high-voltage three-phase motor lines or switching inductive loads to prevent electromagnetic cross-talk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Integrity:\u003c\/strong\u003e When installing in harsh refinery or chemical plant environments, ensure the IP65-rated faceplate is fully seated and the compression gaskets are evenly tightened against the enclosure frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Cable Termination:\u003c\/strong\u003e Terminate all coaxial V Net bus segments using matching 50 Ohm physical terminators at each structural end of the link to avoid signal reflections.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":43777838612570,"sku":"YNT512D-P11\/KT","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/700..jpg?v=1785718638","url":"https:\/\/www.spareoil.com\/es\/products\/yokogawa-ynt512d-p11-kt-fa-m3-dcs-ethernet-repeater-module","provider":"SpareOil Automation","version":"1.0","type":"link"}