{"product_id":"12p0683x082-kj3001x1-bj1-emerson-deltav-8-ch-do-module","title":"KJ3001X1-BJ1 Emerson DeltaV 12P0683X082 Discrete Output Module","description":"\u003ch2\u003eEmerson KJ3001X1-BJ1 DeltaV M-Series\/S-Series I\/O Subsystem\u003c\/h2\u003e\n\u003cp\u003eConfigured for high-side (source) switching in Emerson DeltaV Distributed Control System (DCS) installations, the \u003cstrong\u003eEmerson KJ3001X1-BJ1\u003c\/strong\u003e (\u003cstrong\u003eKJ3001X1-BJ1\u003c\/strong\u003e Discrete Output Module) provides direct physical\/electrical execution. This 8-channel hardware component interfaces the local I\/O bus with 24 VDC field loads, converting binary control logic into discrete voltage outputs while maintaining galvanic isolation between system electronics and field circuits.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eKJ3001X1-BJ1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson (DeltaV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.25 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e10.7 x 4.1 x 10.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eLocal Bus Current: 100 mA typical at 12 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e12P0683X082\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eDiscrete Output (DO) Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Density\u003c\/td\u003e\n\u003ctd\u003e8 Channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Configuration\u003c\/td\u003e\n\u003ctd\u003eHigh-Side (Source) Switching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Output Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current\u003c\/td\u003e\n\u003ctd\u003eMaximum 45 mA per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003eChannel-to-system galvanic isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStatus Indicators\u003c\/td\u003e\n\u003ctd\u003ePer-channel ON\/OFF LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUL, CSA, CE Certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control \u0026amp; DCS Instrument Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe module incorporates channel-to-system galvanic isolation to eliminate ground loop currents and safeguard the DeltaV local bus from field-side electrical transients. Each of the 8 discrete output channels features an independent solid-state high-side switch capable of delivering up to 45 mA continuous current at a nominal 24 VDC. Dedicated on-board LED diagnostics provide visual validation of the logical state of each individual channel. The mechanical and electrical backplane interfaces are design-certified for hot-swappable installation, ensuring seamless hot-plugging compatibility within M-series and S-series I\/O carriers without disrupting adjacent active processing loops.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What are the physical hot-swap limitations when replacing the module under live system conditions?\u003c\/p\u003e\n\u003cp\u003eA: The KJ3001X1-BJ1 allows online removal and insertion under power. However, field-side power supply lines must remain stable during the swap to prevent unintended inductive kickback or localized current surges. The system backplane automatically recognizes the physical replacement module and restores configuration parameters once the hardware connection is locked.\u003c\/p\u003e\n\u003cp\u003eQ: What is the maximum continuous current rating per channel, and can channels be paralleled for higher loads?\u003c\/p\u003e\n\u003cp\u003eA: Each individual output channel supports a maximum continuous load of 45 mA at 24 VDC. Paralleling multiple channels to drive a single high-current load is not supported, as internal propagation delay variances across the solid-state switches can cause unbalanced current distribution and eventual channel failure. High-current field devices require the installation of an external interposing relay.\u003c\/p\u003e\n\u003cp\u003eQ: Does the module support advanced HART loop protocol or line fault detection capabilities?\u003c\/p\u003e\n\u003cp\u003eA: No, the KJ3001X1-BJ1 is a standard discrete binary signaling module designed exclusively for ON\/OFF switching tasks. It does not possess analog circuit components required for HART communication, nor does it feature internal open-circuit or short-circuit line monitoring functions.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eTo secure proper mechanical alignment and electrical integrity, installers must slide the module vertically into the designated slot on the M-series or S-series I\/O carrier until the dual retention latches click into place. Confirm that the terminal block assembly matches the required 24 VDC high-side sourcing configuration before applying external loop power. All field-side signal cables must use twisted-pair wiring to mitigate electromagnetic interference. Shield wires must terminate at the single-point system ground bar inside the cabinet enclosure and must never form localized ground loops. Maintain a minimum physical separation of 50 mm between low-voltage I\/O cables and high-voltage AC power lines within the internal wire ducting paths to suppress cross-talk.\u003c\/p\u003e","brand":"Emerson","offers":[{"title":"Default Title","offer_id":42870829613146,"sku":"KJ3001X1-BJ1","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/429.jpg?v=1773026484","url":"https:\/\/www.spareoil.com\/products\/12p0683x082-kj3001x1-bj1-emerson-deltav-8-ch-do-module","provider":"SpareOil Automation","version":"1.0","type":"link"}