{"product_id":"1492-cable005y-allen-bradley-series-datasheet-technical-manual","title":"1492-CABLE005Y Allen-Bradley Series Datasheet \u0026 Technical Manual","description":"\u003ch1\u003eAllen-Bradley 1492-CABLE005Y 1492-CABLE(1)Y Connection Products\u003c\/h1\u003e\n\u003cp\u003eConfigured for discrete digital signal distribution in CompactLogix and ControlLogix assemblies, the \u003cstrong\u003eAllen-Bradley 1492-CABLE005Y\u003c\/strong\u003e (\u003cstrong\u003e1492-CABLE005Y\u003c\/strong\u003e Digital Cable) provides direct physical\/electrical execution. This pre-wired 0.5-meter assembly links high-density digital controller modules directly to matching 1492 Interface Modules (IFM) using a 40-conductor wire array. The molded multi-pin connectors isolate data pathways and eliminate manual terminal crimping, securing constant physical signal pathways between multi-channel I\/O cards and field connection points without inducing voltage sags.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003eModel\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003e1492-CABLE005Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003eBrand\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eAllen-Bradley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003eOrigin\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003eWeight\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003e0.33 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003eDimensions\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003e0.5 m (1.64 ft) length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"7\"\u003eOperating Temp\u003c\/td\u003e\n\u003ctd data-row=\"7\"\u003e-20 to +80 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"8\"\u003ePower Consumption\u003c\/td\u003e\n\u003ctd data-row=\"8\"\u003eNone (Passive conductor assembly)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"9\"\u003eCable Type\u003c\/td\u003e\n\u003ctd data-row=\"9\"\u003ePre-wired digital I\/O interface cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"10\"\u003eConductor Count\u003c\/td\u003e\n\u003ctd data-row=\"10\"\u003e40 conductors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"11\"\u003eConfiguration End A\u003c\/td\u003e\n\u003ctd data-row=\"11\"\u003eController module plug-in connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"12\"\u003eConfiguration End B\u003c\/td\u003e\n\u003ctd data-row=\"12\"\u003e1492-IFM keyed connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"13\"\u003eSignal Compatibility\u003c\/td\u003e\n\u003ctd data-row=\"13\"\u003eDiscrete digital signals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"14\"\u003eInsulation Resistance\u003c\/td\u003e\n\u003ctd data-row=\"14\"\u003eIndustrial-grade PVC insulation, oil-resistant jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks and I\/O Density Scaling\u003c\/h3\u003e\n\u003cp\u003eThe 40-conductor infrastructure of the \u003cstrong\u003e1492-CABLE005Y\u003c\/strong\u003e acts as a structural foundation for high-node I\/O density scaling inside control panels. By condensing discrete wiring into a factory-terminated 0.5-meter trunk, the cable maintains a fixed resistance profile across all 40 channels. This reduction in electrical impedance fluctuations prevents propagation jitter across peripheral modules communicating via Profinet \/ EtherNet\/IP deterministic networks, ensuring that rapid state transitions on the I\/O channels mirror precisely within the controller's internal backplane bus communication velocity parameters.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the 1492-CABLE005Y be hot-swapped while the host digital I\/O card is actively carrying 24 VDC signal loads?\u003c\/p\u003e\n\u003cp\u003eA: No. Hot-swapping or disconnecting the 40-pin connector while field circuits are energized can cause transient inductive arcing across adjacent contacts. This risks burning out the gold-plated pins on the module header and may disrupt data logic on the chassis backplane.\u003c\/p\u003e\n\u003cp\u003eQ: How does the \"Y\" suffix in the part number affect the physical terminal mapping on the IFM side?\u003c\/p\u003e\n\u003cp\u003eA: The \"Y\" designation specifies a predetermined factory pinout configuration mapped to specific Allen-Bradley digital I\/O cards. It alters the standard point-to-point conductor mapping matrix to match the pin architecture of the targeted Logix I\/O module.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis and Field Power Isolation:\u003c\/strong\u003e Turn off the main control power and auxiliary field voltages supplying the target I\/O chassis and associated terminal boards before inserting the cable. Verify that no voltage is present at the termination point using a digital multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Keying Alignment:\u003c\/strong\u003e Align the keyed matching tabs on the 1492-IFM connector with the alignment slot on the terminal block before applying insertion force. Forcing an unaligned connector will permanently bend or break the pins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Drain Grounding Execution:\u003c\/strong\u003e Secure the integrated shield drain wire directly to the functional earth terminal or designated ground bar on the IFM assembly. Do not let the drain wire float, as ungrounded shields accumulate electrostatic noise that can disrupt low-voltage logic paths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Radius Compliance:\u003c\/strong\u003e Route the 40-conductor cable bundle through wire ducts ensuring that the dynamic bend radius never drops below 10 times the outer cable diameter. Avoid tight folds at the connector backshell to prevent strain on the factory-molded jacket.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Allen Bradley","offers":[{"title":"Default Title","offer_id":43412714913882,"sku":"1492-CABLE005Y","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/152._eefcca8a-54ca-4106-9320-6c4c1934151c.jpg?v=1779677012","url":"https:\/\/www.spareoil.com\/products\/1492-cable005y-allen-bradley-series-datasheet-technical-manual","provider":"SpareOil Automation","version":"1.0","type":"link"}