{"product_id":"330180-50-05-3300-xl-proximitor-sensor-bently-nevada","title":"330180-50-05 3300 XL Proximitor Sensor | Bently Nevada","description":"\u003cp\u003eConfigured for high-frequency signal conditioning in vibration monitoring platforms, the \u003cstrong\u003eBently Nevada 330180-50-05\u003c\/strong\u003e (\u003cstrong\u003e330180\u003c\/strong\u003e Proximitor Sensor) provides direct physical signal translation for non-contacting proximity probes.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330180-50-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.323 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e6.35 cm x 6.1 cm x 8.13 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +100 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e12 mA maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e0.25 mm to 2.3 mm (nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThe 330180-50-05 maintains a nominal scale factor of 7.87 mV\/µm (200 mV\/mil) for the integrated transducer system. During installation, gap voltage validation is required to ensure the probe tip operates at the -10 VDC target midpoint. Deviations from this voltage range may restrict the linear measurement capacity, particularly if supply voltages drop below -23.5 VDC. The circuit design necessitates specific power supply levels: -17.5 VDC to -26 VDC for non-barrier applications, and -23 VDC to -26 VDC when intrinsic safety barriers are utilized. Cross-talk suppression must be enforced by maintaining required separation distances between adjacent sensors to prevent interference from overlapping radio-frequency fields.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the use of intrinsic safety barriers affect the operating voltage requirements?\u003c\/p\u003e\n\u003cp\u003eA: Yes. When using safety barriers, the power supply must be maintained between -23 VDC and -26 VDC. Operating at voltages more positive than -23.5 VDC can result in a reduced linear range for the transducer.\u003c\/p\u003e\n\u003cp\u003eQ: Is it possible to use this sensor with a 9-metre extension cable?\u003c\/p\u003e\n\u003cp\u003eA: No. The system is factory-calibrated for a 5.0 metre total system length. Substituting components with different lengths will invalidate the scale factor and introduce significant measurement errors.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMount the A308 aluminum housing to a grounded panel to ensure electrical continuity and EMI immunity.\u003c\/li\u003e\n\u003cli\u003eEnsure coaxial cable connectors are fully seated and tightened. Loose connections increase contact resistance, potentially inducing signal noise.\u003c\/li\u003e\n\u003cli\u003eKeep coaxial cable runs segregated from high-voltage AC lines to minimize electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003eVerify the integrity of the shield connection at the monitor termination point to prevent the formation of ground loops.\u003c\/li\u003e\n\u003cli\u003ePrior to final calibration, verify the gap voltage at the monitor output terminals; confirm the -10 VDC target is achieved at the center of the mechanical operating range.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43536858710106,"sku":"330180-50-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/330180-50-05.png?v=1782186297","url":"https:\/\/www.spareoil.com\/products\/330180-50-05-3300-xl-proximitor-sensor-bently-nevada","provider":"SpareOil Automation","version":"1.0","type":"link"}