{"product_id":"330901-00-40-05-02-05-bently-nevada-3300-nsv-proximity-probe","title":"330901-00-40-05-02-05 Bently Nevada 3300 NSv Proximity Probe","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330901-00-40-05-02-05\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330901\u003c\/strong\u003e Proximity Probe, operates as a dedicated hardware component for high-frequency eddy-current gap sensing within 3300 NSv Proximity Transducer Systems. It generates non-contact radio frequency fields to measure dynamic shaft position and vibration displacement relative to the target surface.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eOption Code\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDesignation\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eParameter Value \/ Option Description\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e330901\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase Model\u003c\/td\u003e\n\u003ctd\u003e3300 NSv Proximity Probe, M10 x 1 thread, without armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnthreaded Length Option\u003c\/td\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-40\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOverall Case Length Option\u003c\/td\u003e\n\u003ctd\u003e400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-05\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTotal Length Option\u003c\/td\u003e\n\u003ctd\u003e0.5 meter (20 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-02\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConnector and Cable Type Option\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-05\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAgency Approval Option\u003c\/td\u003e\n\u003ctd\u003eMultiple Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330901-00-40-05-02-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase Model\u003c\/td\u003e\n\u003ctd\u003e330901\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003e3300 NSv\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eProximity Sensors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread \u0026amp; Mounting Specification\u003c\/td\u003e\n\u003ctd\u003eM10 x 1 thread, 400 mm overall case length, 0 mm unthreaded length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Cable Length\u003c\/td\u003e\n\u003ctd\u003e0.5 meter (20 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Specification\u003c\/td\u003e\n\u003ctd\u003e75 ohm coaxial, fluoroethylene propylene (FEP) insulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approval Option\u003c\/td\u003e\n\u003ctd\u003eMultiple Approvals (-05 option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-34 to +177 deg C (-30 to +351 deg F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 to +177 deg C (-60 to +351 deg F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive physical component (0 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight \/ Shipping Weight\u003c\/td\u003e\n\u003ctd\u003e1.5 kg (Shipping Weight)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling \u0026amp; Rotor Dynamics Validation\u003c\/h3\u003e\n\u003cp\u003eThe 330901-00-40-05-02-05 probe uses a polyphenylene sulfide tip housing a wire coil driven by an RF signal from a paired Proximitor sensor. Eddy currents generated in the target shaft alter the coil impedance, maintaining direct linear scaling across reduced target size configurations. Physical calibration ensures precise gap voltage validation targeting -10 VDC at center-gap baseline positions. The 75 ohm FEP coaxial cable preserves high-frequency signal fidelity, aiding cross-talk suppression and continuous tracking of rotor dynamics across tight clearance machinery.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What is the significance of the ClickLoc miniature coaxial connector on option -02?\u003c\/p\u003e\n\u003cp\u003eA: The ClickLoc connector incorporates a positive-locking mechanism that prevents accidental disengagement due to machine vibration, ensuring continuous physical engagement between the probe cable and extension cable.\u003c\/p\u003e\n\u003cp\u003eQ: How does the total length of 0.5 meter (-05) affect system assembly?\u003c\/p\u003e\n\u003cp\u003eA: The 0.5-meter probe lead must be paired with an extension cable (such as a 4.5-meter cable) to match the total system length (e.g., 5.0 meters) required by the matching 3300 NSv Proximitor sensor.\u003c\/p\u003e\n\u003cp\u003eQ: Why must probe tip mechanical clearances be maintained during mounting?\u003c\/p\u003e\n\u003cp\u003eA: The probe tip radiates an RF field; insufficient side clearance to surrounding conductive metal walls alters the eddy-current field pattern, causing linear scale factor distortion and shifting the output gap voltage.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInspect the M10 x 1 threaded mounting port for dirt, metal shavings, or thread damage. Clean threads thoroughly before installing the probe body.\u003c\/li\u003e\n\u003cli\u003eThread the probe into the mounting port by hand until the tip approaches the target shaft surface. Use a multimeter to monitor gap voltage output from the Proximitor sensor during adjustment, setting the target to -10 VDC at baseline center-gap.\u003c\/li\u003e\n\u003cli\u003eTighten the probe locknut against the machine housing or mounting bracket to lock the probe position without twisting the internal coaxial cable.\u003c\/li\u003e\n\u003cli\u003eConnect the ClickLoc coaxial connector to the matching extension cable connector until a firm engagement is achieved. Apply insulating connector protectors over the junction to isolate the connection from local ground.\u003c\/li\u003e\n\u003cli\u003eRoute the FEP coaxial cable through conduit or protective channels, keeping a minimum bend radius of 25 mm (1.0 inch) to prevent coaxial conductor distortion.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43763336740954,"sku":"330901-00-40-05-02-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/330103-00-04-10-02-00_875a8dc6-3378-4756-9f55-1473454f5c75.png?v=1785401361","url":"https:\/\/www.spareoil.com\/products\/330901-00-40-05-02-05-bently-nevada-3300-nsv-proximity-probe","provider":"SpareOil Automation","version":"1.0","type":"link"}