{"product_id":"5204-dfnt-pdpm-prosoft-gateway-new-original-stock","title":"5204-DFNT-PDPM ProSoft Gateway | New \u0026 Original Stock","description":"\u003ch2\u003eProSoft 5204-DFNT-PDPM ProLinx Protocol Master Gateway\u003c\/h2\u003e\n\u003cp\u003eConfigured for high-speed bi-directional data exchange between EtherNet\/IP and PROFIBUS DP networks, the \u003cstrong\u003eProSoft 5204-DFNT-PDPM\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eProSoft 5204-DFNT-PDPMV1\u003c\/strong\u003e Protocol Master Gateway, provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5204-DFNT-PDPM (Alternative Part #: 5204-DFNT-PDPMV1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eProSoft Technology\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.90 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard ProLinx compact housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard industrial rating (contact manufacturer for exact limits)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 VDC nominal (18 to 32 VDC allowable range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEthernet Port\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x 10\/100 Mbps RJ45 port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSerial Port\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x PROFIBUS DP Master DB9 female connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard DIN-rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTerminal Connections\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 mm screwdriver blade required for GND\/Power terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFirmware Revision\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVer. 2.45 (OS 2.41)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProtocol Conversion Latencies \u0026amp; Network Performance\u003c\/h3\u003e\n\u003cp\u003eThe gateway architecture optimizes protocol conversion latencies through dual-port internal memory mapping. The EtherNet\/IP interface utilizes up to 5 independent TCP server sockets, executing PCCC on CIP for explicit messaging (Services 0x4C and 0x4D). Data table mapping is structured with a fixed origin at N10, processing data packets up to 1000 words.\u003c\/p\u003e\n\u003cp\u003eSimultaneously, the PROFIBUS DP Master engine executes full physical and link layer management per IEC 61158. The DB9 interface supports transmission velocities up to 12 Mbps, maintaining cyclic IO scanning and DPV1 extended diagnostic messaging for up to 125 downstream slave devices. Internal propagation delay between the EtherNet\/IP driver and the PROFIBUS master stack is governed by the backplane polling cycle, ensuring deterministic updates.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this gateway support hot-swapping or live extraction under load?\u003c\/strong\u003e A: No. The DC power terminal blocks and communication cables must be isolated before removing the module from the DIN-rail to prevent electrical arcing, backplane current spikes, or data corruption.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can the EtherNet\/IP interface handle simultaneous read and write requests from multiple PLCs?\u003c\/strong\u003e A: Yes. The module features 5 independent TCP server sockets, allowing concurrent connections from multiple Rockwell Automation controllers (ControlLogix, CompactLogix, or SLC). However, aggregating cross-communication within the internal 1000-word memory layout requires strict index mapping to prevent data collision.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What happens if a PROFIBUS slave device drops offline or encounters a fault?\u003c\/strong\u003e A: The master engine utilizes the DPV1 specification to capture extended diagnostics and alarms. This status data is mapped into the internal register structure and mirrored to the EtherNet\/IP host controller via CIP services, allowing the master PLC to detect individual slave dropouts within one network cycle.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting and Orientation:\u003c\/strong\u003e Install the module vertically on a grounded, 35 mm steel DIN-rail. Ensure a minimum clearance of 50 mm above and below the unit to allow natural convective thermal dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower and Grounding Architecture:\u003c\/strong\u003e Connect a regulated 24 VDC external power supply to the screw terminals using a 2.5 mm screwdriver blade. Connect the dedicated GND terminal directly to the central equipment rack ground bus using a low-impedance copper conductor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding Requirements:\u003c\/strong\u003e Use double-shielded, twisted-pair Type A PROFIBUS cable for all serial runs. Ensure the DB9 connector outer metal shell makes continuous 360-degree contact with the cable shield to suppress high-frequency EMI.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTermination:\u003c\/strong\u003e The final slave device on the PROFIBUS segment and the master gateway (if positioned at the physical end of the bus topology) must have active termination enabled via the standard DB9 terminating resistor switch.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PROSOFT","offers":[{"title":"Default Title","offer_id":43474821152858,"sku":"5204-DFNT-PDPM","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/5._f7ab789e-d5e1-4721-b54d-24bba76a2528.jpg?v=1781053054","url":"https:\/\/www.spareoil.com\/products\/5204-dfnt-pdpm-prosoft-gateway-new-original-stock","provider":"SpareOil Automation","version":"1.0","type":"link"}