{"product_id":"5466-353-woodward-analog-transceiver-board-new-original-stock","title":"5466-353 Woodward Analog Transceiver Board | New \u0026 Original Stock","description":"\u003ch2\u003eWoodward 5466-353 MicroNet Series\u003c\/h2\u003e\n\u003cp\u003eConfigured for high-speed analog signal translation in MicroNet and NetCon platforms, the \u003cstrong\u003eWoodward 5466-353\u003c\/strong\u003e (\u003cstrong\u003e5466-353\u003c\/strong\u003e Analog Transceiver Board) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e5466-353\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eWoodward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eNot specified (standard MicroNet chassis slot form factor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC Nominal (Accepts 18 to 32 VDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eHigh-Density Transceiver \/ Analog I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Configuration\u003c\/td\u003e\n\u003ctd\u003e8 Differential Channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Signal Ranges\u003c\/td\u003e\n\u003ctd\u003e4-20 mA, 0-5 VDC, or +-5 VDC (Software Selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Configuration\u003c\/td\u003e\n\u003ctd\u003e4 Proportional Channels (4-20 mA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003eConfigurable 12-bit to 16-bit A\/D and D\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalibration Accuracy\u003c\/td\u003e\n\u003ctd\u003e+-0.1% of Full Scale over operating temperature range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGalvanic Isolation\u003c\/td\u003e\n\u003ctd\u003e500 VRMS (Channel-to-System and Channel-to-Channel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity Range\u003c\/td\u003e\n\u003ctd\u003e5% to 95% non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eIndustrial Drives \u0026amp; Governors Properties\u003c\/h3\u003e\n\u003cp\u003eThe Woodward 5466-353 features optimized thermal heat sink dissipation profiles to stabilize the internal operational amplifiers during high-density channel utilization. The component executes highly responsive actuator loop feedback response metrics, which mitigates loop dead time within the turbine governing logic. The 8 differential input and 4 proportional output stages interface directly with hydraulic actuator drivers, utilizing the software-configurable 12-bit to 16-bit conversion matrix to match the precise dynamic tracking constraints required for deterministic real-time valve positioning.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How is the input channel signal range configured on the 5466-353?\u003c\/p\u003e\n\u003cp\u003eA: The selection between 4-20 mA, 0-5 VDC, and +-5 VDC signal envelopes is fully software-defined through the application software. No manual physical jumper modification on the transceiver circuit board is required.\u003c\/p\u003e\n\u003cp\u003eQ: What are the galvanic isolation boundaries for this analog transceiver board?\u003c\/p\u003e\n\u003cp\u003eA: The board features 500 VRMS galvanic isolation. This protective threshold is enforced both between the field channels and the system logic backplane, as well as between individual input\/output channels to prevent cross-channel electrical noise propagation.\u003c\/p\u003e\n\u003cp\u003eQ: Can this module operate within volatile temperature environments?\u003c\/p\u003e\n\u003cp\u003eA: The hardware is rated for an industrial operating temperature range from -20 deg C up to +70 deg C, allowing installation inside standard unconditioned turbine control enclosures provided condensation is managed.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis Insertion:\u003c\/strong\u003e Guide the transceiver board along the chassis card guides of the MicroNet or NetCon enclosure. Firmly seat the rear plug-in connectors into the backplane, then tighten the top and bottom thumbscrews to secure the physical ground contact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding Protocol:\u003c\/strong\u003e Terminate all analog field wiring using twisted-shielded pairs. Connect the cable shields exclusively to the designated chassis ground bus bar at the entry point of the control cabinet; do not ground both ends of the shield to eliminate ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Separation:\u003c\/strong\u003e Maintain physical separation between the low-voltage 4-20 mA \/ VDC transceiver signal lines and high-voltage AC power or discrete inductive switching lines within the wire ducting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Wiring Terminations:\u003c\/strong\u003e Ensure all terminal block connections are torqued to manufacturer specifications. When deploying the 4-20 mA current outputs, confirm the loop impedance remains within the designated limits of the 24 VDC driving loop.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Woodward","offers":[{"title":"Default Title","offer_id":42870861660250,"sku":"5466-353","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/165_c6065381-7203-4a1a-b8fc-fcf3ed1f2fb2.jpg?v=1772758464","url":"https:\/\/www.spareoil.com\/products\/5466-353-woodward-analog-transceiver-board-new-original-stock","provider":"SpareOil Automation","version":"1.0","type":"link"}