{"product_id":"5x00499g01-emerson-ovation-series-datasheet-technical-manual","title":"5X00499G01 Emerson Ovation Series Datasheet \u0026 Technical Manual","description":"\u003ch2\u003eEmerson 5X00499G01 Ovation Series\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEmerson 5X00499G01\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e5X00499G01\u003c\/strong\u003e Digital Input\/Interface Module, operates as a dedicated hardware component for monitoring discrete field signals and executing protocol translation within Ovation Series platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe 5X00499G01 hardware platform utilizes a multi-configuration architecture where the physical firmware layout and internal sub-assembly board population dictate the active processing role. Field deployments are categorized into specific operational profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Input (DI) Profile:\u003c\/strong\u003e Configured as a high-density discrete signal capture card supporting either 16 isolated channels or a 32-channel ground-referenced matrix.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Interface Module (NIM) Profile:\u003c\/strong\u003e Configured as a serial protocol gateway executing data translation from external third-party logic subsystems to the core controllers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Module Profile:\u003c\/strong\u003e Configured as an independent local subsystem interface populated with an auxiliary 32-bit microprocessor and dedicated 16 MB onboard RAM.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e5X00499G01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson \/ Westinghouse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg to 0.8 kg (variant-dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e150 mm x 100 mm x 30 mm (Control) \/ 144 mm x 60 mm x 30 mm (DI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to +70 deg C (DI) \/ 0 to +60 deg C (Control)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC nominal (rack powered from Ovation backplane)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital Input Capacities\u003c\/td\u003e\n\u003ctd\u003e16-Channel Isolated or 32-Channel Configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Sensing Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC \/ 48 VDC (jumper selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhysical Layer Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232, RS-422, RS-485 serial interfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Filter Response\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;= 5 ms hardware response (programmable filter 1 to 100 ms)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGalvanic Isolation\u003c\/td\u003e\n\u003ctd\u003e500 VDC channel-to-ground (DI) \/ 2500 VAC channel-to-ground (Control)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eNEMA 4X \/ IP66 compliant (DI variant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and DCS Instrumentation\u003c\/h3\u003e\n\u003cp\u003eThe module handles interface matching through a flexible hardware front-end, routing process signals into the master Ovation architecture. Under the DI profile, it enforces a common-mode isolation boundary of 500 VDC channel-to-ground to suppress electrical spikes and ground potentials from entering the logic bus. For networking tasks, the interface maps standard data frames—including Modbus RTU\/ASCII, DNP3, and Allen-Bradley DF1—into the synchronous backplane loop. This layout enables real-time distribution and tracking of 4-20 mA HART loop protocol variables and discrete safety interlocks without increasing transmission lag.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How is the physical field voltage threshold modified on the digital input variant?\u003c\/p\u003e\n\u003cp\u003eA: The input circuitry accommodates either 24 VDC or 48 VDC nominal loop signals. Selection is managed via internal physical hardware jumpers located on the module printed circuit board assembly before rack insertion.\u003c\/p\u003e\n\u003cp\u003eQ: Can the serial interface ports operate simultaneously with different third-party protocols?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the processing core manages independent baud rate and protocol parameters across the available RS-232, RS-422, and RS-485 interfaces, allowing a single module to bridge distinct Modbus and DNP3 serial streams concurrently.\u003c\/p\u003e\n\u003cp\u003eQ: What mechanisms handle hardware diagnostics and fault verification?\u003c\/p\u003e\n\u003cp\u003eA: The module runs continuous internal self-tests that map physical status registers directly to the controller architecture. Local hardware health is verified visually via front-panel LED indicators tracking power, internal module status, and active serial communication line toggles.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariant Matrix Verification:\u003c\/strong\u003e Examine the model suffix label and internal jumper matrix before slotting the unit into the chassis. Ensure the configured firmware role matches the target slot assignment within the project design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding Termination:\u003c\/strong\u003e Terminate all serial data line shields and discrete field signal drain wires exclusively at the main copper panel ground plate inside the cabinet. Do not create multi-point ground connections to avoid circulating earth currents.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInductive Load Suppression:\u003c\/strong\u003e When routing discrete inputs from dry contacts controlling inductive fields (such as heavy relay coils or solenoid valves), install external flyback diodes or RC snubbers at the source device to prevent high-voltage transient spikes from affecting the module.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Emerson","offers":[{"title":"Default Title","offer_id":43480247337050,"sku":"5X00499G01","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/362._9f847ba0-e132-45c3-a840-f426d3f1937f.jpg?v=1781169093","url":"https:\/\/www.spareoil.com\/products\/5x00499g01-emerson-ovation-series-datasheet-technical-manual","provider":"SpareOil Automation","version":"1.0","type":"link"}