{"product_id":"6es5324-3ur11-siemens-simatic-s5-datasheet-technical-manual","title":"6ES5324-3UR11 Siemens SIMATIC S5 Datasheet \u0026 Technical Manual","description":"\u003ch2\u003eSiemens 6ES5324-3UR11 SIMATIC S5 Interface Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eSiemens 6ES5324-3UR11\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e6ES5324-3UR11\u003c\/strong\u003e Interface Module, operates as a dedicated hardware component for coupling central processing units within SIMATIC S5-115H and S5-155H fault-tolerant control platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e6ES5324-3UR11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSiemens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.526 kg (0.99 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e160 mm x 233.4 mm (Packaging: 21.0 cm x 26.1 cm x 3.5 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard industrial limits per SIMATIC S5 specification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eMaximum 1.5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Family\u003c\/td\u003e\n\u003ctd\u003eSIMATIC S5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Designation\u003c\/td\u003e\n\u003ctd\u003eIM 324R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eS5-115H and S5-155H central unit coupling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTariff Code\u003c\/td\u003e\n\u003ctd\u003e85389091\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication Velocity and Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe 6ES5324-3UR11 establishes a specialized physical and electrical connection between separate central subracks to execute continuous backplane bus communication velocity across redundant systems. This interface is structured to handle high-density data synchronization required for real-time fault-tolerant tracking, ensuring deterministic updates between the primary and standby processing units. By mitigating signal latency over the inter-rack parallel bus, the hardware maintains absolute cycle timing synchronization. All communication frames conform to structural parameters mandated by the system firmware, verifying hardware and firmware flash compatibility during hot-standby changeover routines.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What specific function does the \"R\" suffix designate on the IM 324R interface module?\u003c\/p\u003e\n\u003cp\u003eA: The \"R\" designation specifies specialized internal isolation and routing circuitry configured to handle the high-speed data link and synchronization synchronization requirements of redundant (fault-tolerant) central controllers.\u003c\/p\u003e\n\u003cp\u003eQ: Can this interface module be removed or replaced while the S5 subrack is powered on?\u003c\/p\u003e\n\u003cp\u003eA: No. The SIMATIC S5 backplane configuration requires total electrical isolation before extraction. Removing the 6ES5324-3UR11 while the subrack is energized will disrupt bus communication and may damage internal CMOS logic.\u003c\/p\u003e\n\u003cp\u003eQ: How is the physical link between the two coupled central controllers established?\u003c\/p\u003e\n\u003cp\u003eA: The coupling is executed via dedicated multi-pin interface cables connected directly to the front-facing ports of the IM 324R modules installed in the corresponding subracks.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubrack Placement:\u003c\/strong\u003e Insert the IM 324R module vertically into the pre-designated interface slot of the S5 subrack. Use the integrated board guides to ensure orthogonal alignment with the passive backplane connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Strain Relief:\u003c\/strong\u003e Ensure the heavy multi-core interconnection cables are mechanically secured to the cabinet frame or cable tray to prevent mechanical strain on the front-facing port connectors of the module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding Requirements:\u003c\/strong\u003e Verify that the subrack chassis is properly bonded to the central functional earth plane using low-impedance copper straps to suppress high-frequency electromagnetic noise across the synchronization bus.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":43438457913434,"sku":"6ES5324-3UR11","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/191._56b1f3c0-61de-4f88-b629-f7a554d45763.jpg?v=1780278193","url":"https:\/\/www.spareoil.com\/products\/6es5324-3ur11-siemens-simatic-s5-datasheet-technical-manual","provider":"SpareOil Automation","version":"1.0","type":"link"}